Operation Manual

90
Driving
Reversing camera
The reversing camera is activated automatically when reverse gear is engaged.
The reversing camera cannot in any
circumstances replace the need for the
vigilance on the part of the driver.
The image is provided in the touch screen
only, with an indication of the limit of the rear
bumpers (red line) and the general direction of
the vehicle (blue lines).
Clean the reversing camera regularly
using a soft, dry cloth.
The field of vision covered by the camera is
limited: objects in the immediate proximity of
the bumper or located below it are not visible.
The camera's wide-angle lens deforms the
image presented in the screen: the distances
visible in the screen may be different from
the true distances. This deformation varies
according to the loading of the vehicle and the
slope of the road.
High pressure jet washing
When washing your vehicle, do not
direct the lance within 30 cm of the
camera lens.
Never reverse the vehicle looking only
at the screen.