User Manual

ENGLISH

DRAIN BODY INSTALLATION

11 HOSE CONNECTION TO SPOUT BODY

From underneath sink, push the Center Connector (11A) onto Receiving Tube (11B),

until unable to push any further. Pull down on the quick connect housing (11A). If the

housing and the Inner Collet (11C) separate slightly but do not pull off the Receiving

Tube (11B), the connection is secure.

13 WATER SUPPLY CONNECTIONS

Connect water Supply Lines (13A) to Faucet Inlets (13B). Hot water supply lines go into

left inlet. Cold water supply lines go into right inlet. (Supply lines not included). Please

follow manufacturer’s instructions when installing supply lines.

12 HOSE CONNECTION TO VALVE BODY

Slide the End Connectors (12A) with arrow (12D) pointing up onto the Valve Bodies

(12B). Push the End Connectors (12A) all the way up until completely seated. Be

careful not to damage O-Rings (12C). Place Clips (12E) onto End Bodies (12C) to

secure End Connectors (12A).

14 POP-UP INSTALLATION

Install and adjust Pop-Up (14A) using separate instructions supplied with the Pop-Up

assembly.

15 UNIT START UP

Turn on hot and cold water supplies, and check for leaks above and below the sink.

11B

11A

11B

11A

11B

11A

11C

12C

12B

12A

12E

12A

12D

12B

12C

12D

12E

12B

12A

13B

13A

13B

13A

HOT

COLD

14A