Operation Manual

ADSL2/2+ Modem Router
www.phicomm.com
38
Chapter 4: Software Configuration
Protocol: TCP, UDP or ICMP in the drop-down list for the connection between the Source IP
address and Destination IP address.
Rule Unmatched: If the rule is mismatch you can choose to execute the next one or stop the
performance.
IP/MAC Filter Listing: This displays the information about the IP Filter rules.
SNMP
The SNMP (Simple Network Management Protocol) is used to exchange information between
network devices.
Get Community: Set password for incoming Get and get next requests from the management
station.
Set Community: Set password for incoming Set and set requests from the management station.
UPnP
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically
join a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer
in use. UPnP broadcasts are only allowed on the LAN.
UPnP: Activate or Deactivate the UPnP function.
Auto-Configured: If you activate the function, then the UPnP network devices can