Operation Manual

ADSL2/2+ Modem Router

www.phicomm.com

Chapter 4: Software Configuration

Administration

Note:

 There is only one account that can access web management interface. The default

account is admin, and the password is admin. Admin has read/write access privilege.

 When you change the password, you should enter the new password twice, and then

click SAVE to make the new password take effect.

Time Zone

The system time is the time used by the device for scheduling services. There are three methods

to configure the time. You can manually set the time, specify the PC’s Clock as the device’s

system time or connect to a NTP (Network Time Protocol) server. If you manually set the time,

you may also set Daylight Saving dates and the system time will automatically adjust to those

dates. If a NTP server is set, you will only need to set the time zone. If PC’s Clock is selected, the

device will get the PC’s Clock by way of the system time.

NTP Server automatically

Select NTP Server automatically as the synchronize time, you only need to set the time zone.

Note: The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the

Router will get the system time automatically from the NTP Server. You can also configure the