Operation Manual

ADSL2/2+ Modem Router
www.phicomm.com
3
Chapter 2: Hardware Installation
Rear Panel
The rear panel of the ADSL2/2+ Modem Router includes 1 DSL port, 1USB port, 1 LAN port, 1
ON/OFF button, 1 PWR connector, 1 RST button, as explained in table below:
Interface/Button Function
DSL Connect to the Modem port of splitter or directly to the wall jack
USB Connect to your USB device
LAN Connect to your network device
ON/OFF Turn on/off the power of ADSL2/2+ Modem Router
PWR Connect with a power adapter
RST Restore to factory default settings by pressing and holding for 5 seconds