User guide

THE HANDLE POSITIONS
To adjust the handle from one position to another, pull out both sides of the handle on
the swivel point; rotate the handle forwards or backwards into the desired position:
The carry handle has four positions:
1 Forward in the car
2 Straight up for carrying
3 Against the car seat for rocking
4 All the way down to support baby for feeding and play
5 Stop rocking
Always ensure that the handle is locked in position and that the harness is correctly fitted
and the buckle fastened before lifting your car seat.
CANOPY ASSEMBLY
1. Attach domes located on the inside of the sun hood to the
outside of the handle.
2. Attach domes located at the back of the sun hood to the
back of the seat.
3. Pull the sun hood forward to wrap around the handle.
Attach the domes on the inside to the handle.
This child seat can be installed into the appointed stroller as the travel system.
INSTALLATION:
position the coupler on the slot of the
stroller, then press down the coupler into the slot until you
hear a “click” signing the coupler is locked.
IMPORTANT: please make sure you hear a “click”. You
can try to pull up and forward the child seat to confirm the
coupler is locked.
TAKING DOWN:
hold the child seat, lift the red switch of the
coupler with your fingers then take the child seat out.