Operation Manual

6
Introduction
Philips Avent is dedicated to producing caring, reliable products that give parents the reassurance
they need. This Philips Avent baby monitor provides round-the-clock support by ensuring you can
always hear your baby clearly without any distracting noise. The DECT technology guarantees zero
interference from other wireless appliances and a clear signal between the baby unit and the parent
unit.
General description (Fig. 1)
A Baby unit
1 On/off button
3
2 ON light
3 Volume +/– buttons
4 Battery check light
T
5 Nightlight
6 Nightlight button
Q
7 PAGE button
8 Microphone
9 Adapter
10 Small plug
11 Battery compartment lid
12 Socket for small plug
13 Battery compartment
B Parent unit
1 TALK button
2 LINK light
3 SENSITIVITY button
4 On/off button
3
5 Opening for belt clip and neck strap
6 Sound level lights
7 Volume +/– buttons
8 Battery check light
T
9 Microphone
10 Loudspeaker
11 Battery compartment
12 Belt clip
13 Battery compartment lid
14 Neck strap
15 Adapter
16 Charger
17 POWER light
C Travel pouch
Important
Read this user manual carefully before you use the appliance and save it for future reference.
This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult
supervision and should not be used as such.
Check if the voltage indicated on the adapters of the baby unit and the charger corresponds
to the local mains voltage before you connect the baby unit and the charger.
Use and store the appliance at a temperature between 10°C and 40°C.
The appliance is suitable for mains voltages from 220 to 240V.
Do not expose the baby monitor to extreme cold or heat or to direct sunlight.
,
,
,
,
,
ENGLISH