Operation Manual
22
ENGLISH
Adjusting the Co ee Length
The machine allows you to adjust the amount of brewed co ee according
to your taste and the size of your cups.
Each time the “
” or
“ ”
button is pressed, the machine brews a pre-set
amount of co ee. Each button may be individually programmed for a
speci c brew setting.
The following procedure describes how to program the “
” button.
1
Place a cup under the co ee dispensing spout.
2
Press and hold the “ ” button until it starts to ash quickly.
Then release the button. The machine is now in programming mode.
The “
” button ashes throughout the programming cycle.
The machine starts brewing co ee.
3
Press the “ ” button as soon as the desired amount of co ee is
reached.
Now the button “
” is programmed; each time it is pressed, the machine
will brew the same amount of espresso that was just programmed.
Note:
Follow the same procedure to program the
“ ”
button.
Press the
“ ”
button to stop brewing when the desired amount of co ee
is reached.