Operation Manual

37 ENGLISH 37
2
Remove the Classic Milk Frother from the steam/hot water wand.
3
Remove the water tank and the “INTENZA+” water  lter from the water
tank (if it was installed), replacing it with the small white original one.
4
Pour all the descaling solution into the water tank.
5
Fill the water tank with fresh water up to the CALC CLEAN level and put
it back into the machine.
6
Place a large container (1.5 l) under both the steam/hot water wand
and the co ee dispensing spout.
7
Press and hold the " " button for at least 3 seconds to start the
descaling cycle.
The “
” button shines steadily. The " " button  ashes throughout
the cycle.