221V2 www.philips.
Table of Contents 1 1.1 1.2 1.3 Important Safety precautions and maintenance................ 1 Notational Descriptions.......................................... 2 Disposal of product and packing material.... 3 2 2.1 2.2 2.3 Setting up the monitor Installation........................................................................ 4 Operating the monitor............................................ 5 Remove Base Stand and Base.............................. 7 3 3.1 3.2 3.
• 1. Important • This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. Do not subject the monitor to severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
• 1.2 Notational Descriptions IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology.
Recycling Information for Customers There is currently a system of recycling up and running in the European countries, such as The Netherlands, Belgium, Norway, Sweden and Denmark. In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw The monitor contains parts that could cause damage to the nature environment.
Connecting to your PC 2. Setting up the monitor 2.
The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Front view product description Main menu Input : To switch monitor’s power ON and OFF : To access the OSD menu : To adjust brightness of the display :Auto picure control switching in wide and 4:3 format : Automatically adjust the horizontal position, vertical position, phase and clock settings.
Physical Function Tilt 221V (221V2) Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. 2.3 Remove Base Stand and Base Remove the Base Stand 221V2 Place the monitor face on a safe surface, pull the base stand away from the monitor. 100mm 100mm Remove the Base Condition: • For VESA standard mounting applications 1. Separate the base from the base stand.
3. Product information 3.1 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? You want the very best visual clarity and viewing comfort for every type of content.
3.2 Philips SmartControl Lite First launch -Wizard • The first time after installation of SmartControl Lite, it will automatically go to Wizard for first time launch. • The wizard will guide you through adjustment your monitor performance step by step. • You can go to Plug-in menu to launch wizard later on as well. • You can adjust more options without wizard by Standard pane. The new SmartControl Lite software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface.
Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. • You can follow the instruction and do the adjustment. • Cancel prompts user if you want to cancel installation.
Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input. • Example for Color Calibration 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4.
First color Calibration Screen: • • • • Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File>Presets pane. Cancel closes the UI and returns to the plug in page. SmartImage Lite Allows user to change setting for better display setting based on content. • • • When Entertainment is set, SmartContrast and SmartResponse are enabled.
Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available. • • Display the Source instruction pane and current input source setting. On single input displays, this pane will not be visible. Options>Audio - Will only be active when selecting Volume from the drop-down Options menu.
Context Sensitive menu The Context Sensitive menu is Enabled by default. If Enable Context Menu has been checked in the Options>Preferences pane, then the menu will be visible. Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. The Context Menu has four entries: • SmartControl Lite - When selected the About Screen is displayed.
Task Tray Menu Disabled When the Task Tray is disabled in the preference folder, only the EXIT selection is available. To completely remove SmartControl Lite from the task tray, disable Run at Startup in Options>Preferences. Task Tray Menu Enabled The task tray menu can be displayed by rightclicking on the SmartControl Lite icon from the task tray. Left Click will launch the application.
3.3 Philips' Flat Panel Monitors Pixel Defect Policy Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control.
Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern.
4 Technical Specifications 221V2 Picture/Display LCD panel type Backlight Panel size Aspect ratio Pixel Pitch Brightness SmartContrast Contrast ratio (typ.) Response time (typical) Optimum Resolution Viewing angle Picture Enhancement Display colors Vertical refresh rate Horizontal Frequency sRGB Connectivity Signal input Input Signal Convenience User Convenience OSD Languages Other convenience Plug & Play Compatibility Stand Tilt TFT-LCD CCFL 21.5" W( 54.6 cm) 16:9 0.284 x 0.
Power On mode Normal Operation(typical) Sleep Off Heat Dissipation* Normal Operation Sleep Off Power LED indicator Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Box dimension (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Temperature range (operation) Relative humidity Altitude MTBF 48W 24.72W 24.55W 24.7W 0.14W 0.15W 0.21W 0.11W 0.12W 0.
Environmental ROHS Packaging Compliance and standards Regulatory Approvals Cabinet Color Finish YES 100% recyclable CE Mark, FCC Class B, SEMKO, TÜV/GS, TÜV Ergo, UL/cUL Black/Black Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
4.2 Automatic PowerSaving 4.1 Resolution & Preset Modes Maximum Resolution For 221V2 1920 x 1080 at 60 Hz (analog input) 1920 x 1080 at 60 Hz (digital input) Recommended Resolution For 221V2 1920 x 1080 at 60 Hz (digital input) H. freq (kHz) 31.469 31.469 31.469 35.000 37.500 35.156 37.879 46.875 48.363 60.023 63.981 79.976 55.469 55.935 70.635 66.587 Resolution 640x350 720x400 640x480 640x480 640x480 800x600 800x600 800x600 1024x768 1024x768 1280x1024 1280x1024 1440x900 1440x900 1440x900 1920x1080 65.
CE Declaration of Conformity This product is in conformity with the following standards • EN60950-1:2006 (Safety requirement of Information Technology Equipment) • EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission) • EN61000-3-3:1995+A1:2001+A2:2005 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives a
This monitor is equipped with a function for saving energy which supports the VESA Display Power Management (DPM) standard. This means that the monitor must be connected to a computer which supports VESA DPM. Time settings are adjusted from the system unit by software. VESA State Normal operation Power Saving Alternative 2 One step LED Indicator ON (Active) Green Power Consumption < 31.6W (typ.) Sleep Switch Off Amber Off < 0.8 W (typ.) < 0.5 W (typ.
Federal Communications Commission (FCC) Notice (U.S. Only) • • • • FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo, This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EN 55022 Compliance (Czech Republic Only) Commission Federale de la Communication (FCC Declaration) • • • • Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
Polish Center for Testing and Certification Notice North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. The equipment should draw power from a socket with an attached protection circuit (a threeprong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
Ergonomie Hinweis (nur Deutschland) China RoHS Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and LCD monitor which are produced and sold for China market have to meet China RoHS request.
Your Philips F1rst Choice Warranty 6 Customer care and warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact the Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty.
What is excluded? The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product. Just a click away In case of any problems, we advise you to read the operating instructions carefully or go to the www.philips.com/support website for additional support.
F1rst Choice Contact Information Country Austria Belgium Denmark Finland Luxembourg The Netherlands Norway Poland Portugal Spain Sweden Switzerland United Kingdom Code +43 +32 +45 +358 +352 +31 +47 +48 +351 +34 +46 +41 +44 Telephone number 0810 000206 078 250851 3525 8761 840 320 041 26 84 30 00 0900 0400 063 2270 8250 0223491505 2 1359 1440 902 888 785 08 632 0016 02 2310 2116 0207 949 0069 29 Tariff €0.07 €0.06 Local call tariff €0.08 Local call tariff €0.
• Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase.
Consumer Information Centers CROATIA Renoprom d.o.o. Ljubljanska 4, Sv.
ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 SERBIA & MONTENEGRO Kim Tec d.o.o. Viline vode bb, Slobodna zona Beograd L12/3 11000 Belgrade Serbia Tel. +381 11 20 70 684 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.
NEW ZEALAND Company: Visual Group Ltd. Address: 28 Walls Rd Penrose Auckland Phone: 0800 657447 Fax: 09 5809607 E-mail: vai.ravindran@visualgroup.co.nz Service Hours: Mon.~Fri. 8:30am~5:30pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakarta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakarta Pusat. Phone: 021-3455150, 34835453 Asia HONG KONG/Macau Company Name: PHK Service Limited Address: Flat A, 10/F.
Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: consumer.care.sg@philips.com Service hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm MDR Microware Sales Inc. Cebu Branch N. Escario corner Clavano St., Cebu City Phils. # 255-4415/ 255-3242/253-9361/4124864 to 67 Sun # 0922-8210045 to 46 Taiwan Company: FETEC.CO Address: 3F, No.6, Lane 205, Sec.
Israel Company: Eastronics LTD Address: 13 Rozanis St. P.O.B. 39300, Tel Aviv 61392 Israel Tel: 1-800-567000 call free in Israel; (972-508353722 after service hours until 20:00) Fax: 972-3-6458759 E-mail: eastronics@eastronics.co.il Service hours: Sun.~Thurs. 08:00 - 18:00 Your Philips F1rst Choice Warranty(USA) Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation.
WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner's manual and keep both nearby. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
. PC environment Processor: o CUP and Graphic card name and driver version o Operating system o Application being used . Other cards installed Having the following information available will also help speed up the process: . Your proof of purchase indicating: date of purchase, dealer name, model and product serial number. . The full address to which the swap model should be delivered. (In U.S.A., Puerto Rico and U.S.
Your International Guarantee Dear Customer, Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured. Therefore always check whether a product can be used in a specific country.
AUTO button doesn't function • The auto function is applicable only in VGA- Analog mode. If the result is not satisfactory, you can do manual adjustments via the OSD menu. 7 Troubleshooting & FAQs 7.1 Troubleshooting Note The Auto Function is not applicable in DVI-Digital mode as it is not necessary. This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Horizontal flicker appears • • Green, red, blue, dark, and white dots appears on the screen • The remaining dots are normal characteristic of the liquid crystal used in today’s technology, Please refer the pixel policy for more detail. Adjust the image using the “Auto” function in OSD Main Controls. Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
7.2 SmartControl Lite FAQs Q1. I change the monitor on a PC to a different one and the SmartControl Lite becomes un-usable, what do I do? Ans.: Restart your PC and see if SmartControl Lite can work. Otherwise, you will need to remove and re-install SmartControl Lite to ensure proper driver is installed. Q2. The SmartControl Lite functions worked well before, but it does not work anymore, what can I do? Ans.
Ans.: 7.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for Philips 21.5": 1920 x 1080 @60Hz. • Unplug all cables, then connect your PC to the monitor that you used previously. • In the Windows Start Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab.
alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Q8: Can I change the color setting of my monitor? Ans.: Yes, you can change your color setting through OSD control as the following procedures, • Press "OK" to show the OSD (On Screen Display) menu • Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below. 1.
Q13: or PVA technologies. TN panels have improved over the years, but IPS panel still gives superior results over TN panel. What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen.
2010 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
