Quick Start Manual

10 EN
Changing picture and sound settings
You must set
[
Home
]
in
[
Location
]
. Otherwise, these settings
will not be memorized after the unit goes to standby mode.
Changing picture settings
1 Press MENU; navigate to [Consumer TV setup] -
[Picture].
2 Press
Î
or
ï
to select one of the picture settings, and
press OK to enter the setting.
3 Adjust the picture quality.
[
Auto Picture
]
You can manually set the picture controls for the Personal
setting and/or you can select one of the following Auto
Picture presets. Press
Î
or
ï
to select the desired setting,
then press OK.
•
[
Personal
]
: The customized settings you defi ned by
using the
[
Picture
]
menu.
•
[
Standard
]
: For normal TV viewing.
•
[
Sports
]
: Vivid picture settings for high action.
•
[
Movie
]
: Brilliant picture settings for a cinematic
experience.
•
[
Game
]
: Optimized for PCs, games consoles and
playstations.
4 Press MENU to exit.
Changing sound settings
1 Press MENU; navigate to [Consumer TV setup] -
[Sound].
2 Press
Î
or
ï
to highlight a sound setting and press OK
to select the setting.
3 Adjust the following items.
[
Auto Sound
]
You can manually set the sound controls for the Personal
setting and/or you can select one of the following Auto
Sound presets. Press
Î
or
ï
to select the desired setting,
then press OK.
•
[
Personal
]
: The customized settings you defi ned by
using the
[
Sound
]
menu.
•
[
Standard
]
: For normal TV viewing.
•
[
Movie
]
: Realistic sound settings for a cinematic
experience.
•
[
Music
]
: Emphasize high and low frequency for
instrument sound.
•
[
News
]
: Clear sound settings for human voice.
4 Press MENU to exit.
Clone TV confi guration data
Once you have completed the setup of the master TV and
tested that it receives all the required channels, follow the
TV to USB section below to extract a copy of the setup
confi guration to a USB storage device.
Then follow the USB to TV section below to copy the setup
confi guration to all additional TVs using the same confi guration.
TV to USB
1 Connect your USB storage device to the USB port on the
side of your TV.
2 Press MENU and select
[
TV to USB
]
.
3 Press OK to start the copy of the confi guration data to
USB.
USB to TV
1 Connect your USB storage device to the USB port on the
side of your TV.
2 Press MENU and select
[
USB to TV
]
.
3 Press OK to start the copy of the confi guration data to
TV.
Note
• After this setting is completed, the TV will restart automatically.