Register your product and get support at www.philips.
Contents 8.5 Satellite installation 36 8.6 Problems with satellites 40 1 My new TV 4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Smart TV 4 App gallery 4 Rental videos 4 Social networks 4 Skype 4 Smartphones and tablets 4 Pause TV and recordings 5 EasyLink 5 9 Home menu 41 10 TV guide 42 10.1 What you need 42 10.2 Using the TV guide 42 10.3 Recordings 42 11 Sources 43 2 Setting up 6 2.1 2.2 2.3 2.4 2.5 2.6 11.1 Sources list 43 11.2 From standby 43 11.
20 Settings 63 20.1 20.2 20.3 20.4 Setup menu 63 Picture 64 Sound 67 Universal access 70 21 Specifications 72 21.1 21.2 21.3 21.4 21.5 21.6 21.7 21.8 Environmental 72 Reception for non-satellite TVs 72 Reception for satellite TVs 73 Display 73 Power 73 Dimensions and weights (5709 series) 73 Connectivity 74 Multimedia 74 22 Software 75 22.1 22.2 22.3 22.4 Software update 75 Software version 75 Open source software 75 Open source license 75 23 Troubleshooting and support 81 23.1 23.2 23.3 23.4 23.
Start Smart TV and add the video store App to the Smart TV start page. 1 My new TV Open the video store App, create your personal account, select the movie and press play. No fuss with downloading, you can watch the movie immediately*. 1.1 Smart TV In Help, press Keywords and look up Rental videos for more information. Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.
1.6 1.8 Smartphones and tablets EasyLink To use your smartphone or tablet as a TV remote control or as your media controller, download the Philips MyRemote app from your smartphone or tablet app store. With EasyLink you can operate a connected device, like a Bluray Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected devices. Operate your TV from your smartphone or tablet, switch channels or change the volume.
TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 2 Setting up 2.3 2.1 Tips on placement Read safety • Position the TV where light does not shine directly on the screen. • Position the TV up to 15 cm away from the wall. • The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen. Read the safety instructions first before you use the TV.
2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals. 2.6 Satellite dish Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
• Scan Select Scan to scan for your wireless network (your wireless router). The TV might find several wireless networks in your proximity. • WPS If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press Connect to make the connection. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
Network problems Connect the router Wireless network not found or distorted To connect and setup the router follow steps 1 to 5. • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation.
For more information on Wi-Fi Miracast, press Keywords and look up Wi-Fi Miracast™. • Reset Wi-Fi Miracast group Clear the list of connected and blocked devices that are used with Miracast. • Wi-Fi smart screen For more information on Wi-Fi smart screen, press Keywords and look up Wi-Fi smart screen. • TV network name If you have more than one TV in your network, you can rename the TVs here. • Netflix Settings Adjust Netflix settings.
4 Connections If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. For more information on using EasyLink, press Keywords and look up EasyLink CEC. 4.1 Tips on connections Connectivity guide DVI to HDMI Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS. • Only for TVs with component connectors. CVBS - Audio L R CVBS - Composite Video is a high quality connection.
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink. caused by interference with the TV processing, the picture processing of these devices should be disabled. The TV comes with Pixel Plus Link switched on and disables the picture quality processing of recent Philips devices connected to the TV. To switch off Pixel Plus Link, in the EasyLink settings menu, select Pixel Plus Link and select Off. Example HDMI CEC branding names are property of their respective owners.
Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV. To switch off the Switch off timer, press and select Setup and press OK. Select TV settings > General settings > Switch off timer and set the slider bar to Off. Use the Common Interface slot on the TV to insert the CAM card.
4.6 Audio Out settings Home Theatre System - HTS Audio Out delay Connect HTS With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised. Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable if the device has no HDMI connection.
format. 3 - Select Multichannel or Stereo. 4 - Press , repeatedly if necessary, to close the menu. Audio Out levelling Use the Audio Out levelling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing. If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control. To level the difference in volume . . .
CVBS - Audio L R Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV. Y Pb Pr - Audio L R Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV. • Y shares the same jack with CVBS. • Component and Composite share audio jacks. 4.10 USB Hard Drive What you need If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar).
Install the keyboard Installation To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. If you select a Cyrillic or Greek keyboard lay-out first, you can select a secondary Latin keyboard lay-out. Before you can pause or record a broadcast, you must connect and format a USB Hard Drive.
You can use the scroll wheel to scroll pages up and down. For more information on how to connect a keyboard, press Keywords and look up USB keyboard. Mouse speed You can adjust the speed of the mouse moving on screen. To adjust the speed . . . If the contents list does not appear automatically, press SOURCE, select USB and press OK. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.
the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV. CVBS - Audio L R Use a Video Audio L/R cable to connect the camcorder to the TV. Settings Ideal monitor setting If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically. If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.
• Press the Joystick to confirm a selection or setting. 5 Switch on 5.1 On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up. With the TV in standby, press onon the remote control to switch the TV on. Switch to standby To switch the TV to standby, press on the remote control.
6 Remote control 6.1 Key overview Top 1 - SMART TV To open the Smart TV start page. 2 - Colour keys Follow on screen instructions. Blue key , opens Help. 3 - INFO To open or close programme info. 4 - BACK To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous Smart TV page. 1 - Standby / On To switch the TV On or back to Standby. 2 - Playback and record keys • Play , to playback.
4 - Mute To mute the sound or to restore it. 6.4 5 - Channel To switch to the next or previous channel in the channel list. To open the next or previous page in Text or start the next or previous chapter on a disc. Your remote control is treated with a scratch-resistant coating. Cleaning To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control. 6 - TEXT To open or close Text / Teletext. 6.
7 Channel list TV channels Favourite channels 7.1 You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list selected, you will only see your favourite channels when you switch through channels. Watching TV channels Switch channels Create your favourite channel list 1 - While watching a TV channel, press LIST to open the channel list. 2 - Select All to view all channels. 3 - Select the channel, and press to mark as favourite.
Some digital broadcasters have age rated their programmes. When the age rating of a programme is equal to or higher than the age you have set as age rating for your child, the programme will be locked. To watch a locked programme you must enter the child lock code. The parental age rating is set for all channels. Rename channels You can rename channels in the channel list. 1 - Select the channel you want to rename in one of the channel lists. 2 - Select the channel to rename. 3 - Press .
Select Status to view technical information on the channel (if it is analogue or digital) or a connected device you are watching. Share Enables the user to communicate his activity with his social networks (such as Twitter, facebook or email). Picture format Universal access If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen.
3 - Press a colour key to select a colour-coded subject at the bottom of the screen. Menu language Text sub-pages To change the language or the TV menus and messages . . . A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press or . T.O.P. Text pages 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Menu language and press OK. 3 - Select the language you want and press OK.
If none of the preferred subtitle languages are available, you can select another subtitle language which is available. Menu language To set the primary and secondary subtitle language . . . To change the language or the TV menus and messages . . . 1 - Press and select Setup and press OK. 2 - Select Channel settings and select Languages > Primary subtitles language or Secondary subtitles language and press OK. 3 - Select a language and press OK. 4 - Press , repeatedly if necessary, to close the menu.
key or OK key to open their interactive programme. Off. Navigate iTV pages To switch off the Automatic channel update . . . You can use the arrow and colour keys, the number keys and the key to navigate the iTV pages. You can use the (Play), (Pause) and (Stop) keys to watch videos within iTV pages. 1 - Press and select Setup and press OK. 2 - Select Channel settings and press OK. 3 - Select Channel installation > Automatic channel update > Off and press OK.
Child lock code of this TV. 5 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB memory device. Channel list copy Introduction You can check the current version of the TV software with Current software info in > Setup > Software settings. To an already installed TV 1 - Verify the country setting of the TV. (To verify this setting, press and select Setup and press OK. Select Search for channels > Re-install channels and press OK.
TV channel you want to install on a channel number with multiple TV channels. Network frequency With the Network frequency mode set to Manual, you can enter the network frequency value received from your cable provider here. To enter the value, use the number keys. DVB-T + DVB-C If you can use a DVB-T antenna input but also a DVB-C input, you can set up your TV for both DVB-T and DVB-C. Install one system followed by the other with the necessary settings.
control digit keys. Alternatively, select the frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK. If you use DVB-C to receive channels, the option Symbol rate mode is available. For Symbol rate mode, select Automatic, unless your cable provider gave you a specific symbol rate value. To enter the symbol rate value, use the number keys.
8 Tune from the channel list Satellite channels To tune to a channel from the channel list . . . 1 - In the channel list, select or in the menu bar to select the TV or Satellite channel list. 2 - Select a list. 3 - Select a channel in any of the lists and press OK. The TV will tune to the selected channel. 8.1 Watching satellite channels To watch satellite channels . . . Press and select Satellite and press OK. The TV tunes to the satellite channel you last watched.
channel to another location and press OK. 5 - Once complete, press EXIT to exit from the Favourite channel list. Favourite channels You can mark channels as favourite channels. Your favourite satellite channels are collected in the Favourites list of the satellite channel list. 8.4 Lock satellite channels Watching favourite channels Set up a favourite channel list to easily switch between the channels you want to watch.
Child lock code Installing You can set or change the Child lock code. You can install your satellites during the initial TV setup. The satellite installation follows the TV channel installation. If you only watch satellite channels, you can skip the TV channel installation. You can always start a new satellite installation from the Setup menu. To set the lock code or to change the current code . . . 1 - Press and select Setup and press OK.
Update channel packages User band number With Update channel package, you can bring back satellite channels that were in the satellite channel list before but are now missing. The missing channels were repositioned on the transponder by the satellite operator. The TV must be updated with the latest version of the channel package. In a Unicable system, each connected satellite receiver must be numbered (e.g. 0, 1, 2 or 3 etc.).
Remove a satellite Update satellite channels You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. However, some satellite operators do not allow removing a satellite. Once a day, at 6 AM, the TV automatically updates the satellite channels. A channel update looks for new channels and adds them to the channel list.
1 - Press and select Setup and press OK. 2 - Select Satellite settings and press OK. 3 - Select Languages and press OK. Select the setting you want. 4 - Press , repeatedly if necessary, to close the menu. 1 - Press and select Setup and press OK. 2 - Select Satellite settings > Languages > Audio description > Speakers / Headphones and press OK. 3 - Select Speakers, Headphones or Speakers + headphones and press OK. 4 - Press , repeatedly if necessary, to close the menu.
To install a transponder . . . 1 - Press and select Setup and press OK. 2 - Select Satellite settings > Channel installation > Manual installation and press OK. 3 - If you have more than 1 satellite installed, select the satellite/LNB for which you want to add channels. 4 - Set the Polarization you need. If you set the Symbol rate mode to Manual, you can enter the symbol rate in Symbol rate manually. Enter the Frequency and start searching for the transponder.
9 Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. Open the Home menu 1 - To open the Home menu, press . 2 - Select an activity using the arrow keys and press OK to start the activity.
10 Change day TV guide The TV guide can show scheduled programmes for the upcoming days (maximum up to 8 days). 10.1 If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press to go back to the previous day. Alternatively, you can press OPTIONS and select Change day. Select Previous day, Today or Next day and press OK, to select the day of the schedule.
To rescan all TV connections and update the Sources menu, press OPTIONS. select Scan connections and press OK. 11 Sources 11.2 11.1 From standby Sources list With the TV in standby, you can switch on a connected device with your TV remote control. In the list of connections - the Source menu - you can find the devices connected to the TV. From this Source menu, you can switch to a device.
12 off. Timers and clock To deactivate the Switch off timer . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Switch off timer and set the slider bar to Off. 3 - Press , repeatedly if necessary, to close the menu. 12.1 Sleeptimer For more information on environmentally friendly TV settings, press Keywords and look up Eco settings. With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer . . .
13 Games 13.1 Play a game With a game console connected to the TV, you can play games on TV. For more information on connecting a game console, press Keywords and look up Game console, connect. Start a game 1 - Press SOURCES, select the game console and press OK. 2 - On the game console, start the game and select the multi or two-player mode. Ideal game setting For some games, where speed and precision is needed, set the TV to the ideal Game setting before you start playing.
14 The menu bar Your photos, videos and music Navigate to the menu bar and select the type of file you want to watch or play. Select Photos, Music or Videos. Alternatively, you can open the Folders view and browse your folders to look for a file. 14.1 Sorting From a USB connection or network computer To browse your photos by date, month, year or alphabetically by name, press Sort. To browse your music by album, artist, genre or alphabetically by name, press Sort.
• Shuffle Plays your videos in a random order. • Repeat Plays a video once or continuously. Play music To play music, select Music in the menu bar, select a song and press OK. If there are more songs in the same folder, press Play all to play all songs in this folder. To jump to the next or previous song, press + or -. To pause the music, press OK. Press OK again to continue. To make a 10-second jump in a song or 10-second jump back, press or . To rewind or fast forward, press or .
4 - Press , repeatedly if necessary, to close the menu. Share a screen on TV Blocking a previously connected device To share the screen of your smartphone, tablet or computer on the TV . . . If you want to block a device that you previously connected, you need to clear the Wi-Fi Miracast connections list first. If you clear this list, you will have to confirm or block the connection for every device again. 1 - Switch on the TV.
15 Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. For more information, press Keywords and look up USB Hard Drive. Pause or resume a broadcast To pause a broadcast, press (Pause). A progress bar appears briefly on screen. To call up the progress bar, press (Pause) again. To resume watching, press (Play).
the TV guide comes from the Internet, you can select the date at the top of the page and press OK. 2 - With the programme highlighted, press Record. The TV adds some time buffer at the end of the programme. You can add some extra buffer if needed. 3 - Select Schedule and press OK. The programme is scheduled for recording. A warning will appear / will be shown automatically when overlapping recordings are scheduled.
16.3 Watch a recording To watch a recording . . . 1 - Press , select Recordings and press OK. 2 - In the list, select the recording and press (Play) to start the playback. You can use the (Forward), (Rewind), (Pause) or (Stop) keys on the remote control. Expired recording Broadcasters can limit the number of days a recording can be viewed. A recording in the list can show the number of days before it expires.
If the TV camera is not connected, Skype will not start. 17 Skype Sign in 17.1 Sign in to Skype with your Skype Name and password. If you don't have a Skype Name yet, you have to create a new Skype account. About Skype With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world. Talk to your friends while watching them on the big screen of your TV. To sign in to Skype… 1 - Press to open the Home menu.
password cannot contain a space. 17.4 If you don't have a Skype Name and Password yet, you can create a new account on the sign in page on TV. Skype menu 1 - On the sign-in page, select New account and press OK. 2 - Create your new account. • Full name Enter your full name. • Skype name Enter a name as your Skype name. Your Skype Name will be shown in the list of contacts of other Skype users. A Skype Name must begin with a letter, upper or lowercase.
View or change your email address, check the amount of credit you have or view the subscription information, or write a message that reflects your mood. Add a phone number In People, the list of your contacts, you can add a phone number as a contact. You can call a phone with a Skype voice call. You need Skype Credits to make a phone call. • Profile picture If you did not upload a profile picture with your computer yet, you can select one of the available avatars as Profile picture here.
1 - On the Contacts page, select the contact you want to call. 2 - Select Call and press OK. If your contact is on Skype and answers the call, you can talk to your contact. 3 - To end the call, select End call and press OK. Remove or rename You can Remove or Rename contacts. To remove a contact… A contact can add you to a voice call with more than one participant. You cannot add an extra participant yourself. 1 - On the Contacts page, select the contact you want to remove.
Outgoing calls and press OK. 17.8 To view new contact requests, select Contact requests and press OK. Skype credit To view and listen to your voicemails, select Voicemails and press OK. On Skype, you can buy Skype Credit or take a Skype subscription. With Skype Credit or a Skype subscription available, you can call landline phones and mobile phones with your TV. For how long your Skype events are kept in this history list depends on the amount of contacts you have and how intensively you use Skype.
password for confirmation. If you allow a contact to send you a voicemail when you can't answer the call within 15 seconds and you are in another call, check the box of I am already in a call. If you allow a voicemail, when you declined a call, check the box of I decline an incoming call. Video To set your preferences for voicemail… You can set Skype to restrict the use of video in Skype calls. 1 - Sign in to Skype with your account. 2 - In the Skype menu, select Settings and press OK.
4 - Press Done to store the camera viewpoint and to go back to your Skype call. 17.10 Sign out When you sign out of Skype, you are signing out your Skype account. Your Online status will change to Offline. Your contacts will not be able to call you. To sign out… 1 - Press Back from anywhere within Skype to return to the Skype menu. 2 - Select Sign out in the Skype menu and press OK. The TV will ask you to quit Skype or to use Skype with another Skype account. 17.
1 - Switch on Smart TV parental control by selecting Enable and then press OK. 2 - Enter an unlock PIN code of your choice. 3 - Confirm your PIN code. Adult 18+ rated apps are now locked. To open a locked app, select the app and press OK. The TV will ask you to enter your 4-digit code. 18 Smart TV 18.1 About Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. 18.
On an App page, press OPTIONS and select Security info. If a lock is shown next to the loading animation on the bottom of the screen while loading a page, the transfer is secured. The Internet App opens the World Wide Web on your TV. On your TV, you can view any Internet website but most of them are not tailored for a TV screen. - Some plug-ins (e.g. to view pages or videos) are not available on your TV. - Internet pages are shown one page at a time and full screen.
18.6 Streaming video Reset Smart TV With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard Drive connected, you can also download rental movies from video stores that offer movie downloading only. You can pause or restart a downloaded rental movie. Consult the video store regarding the rental duration of rental movies.
19 Stream a TV channel Multi room With Multi room, you can watch the current TV channel or open the channel list of the other TV. If you select a channel from the list, the other TV will also switch to the channel you selected. If the other TV has a build-in satellite tuner with installed channels or a connected Hard Disc Drive (HDD) with recordings*, you can also watch these on this TV. You cannot switch channels while the other TV is recording, in Pause TV mode or using Skype. 19.
Automatic channel update, do a digital reception test or install analogue channels manually. 20 Settings Languages 20.1 Press Keywords and look up Audio language or Subtitles. Setup menu Universal access Press Keywords and look up Universal access for visually and hearing impaired users settings. Quick picture and sound settings Channel installation With Quick picture and sound settings you can set your basic picture preferences in a few easy steps.
5 - Press , repeatedly if necessary, to close the menu. Update software For more information on adjusting individual picture settings, press Keywords and look up Picture. Press Keywords and look up Software, Internet update or Software, USB update. Home or Shop If the Picture style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. A setting meant for in-store promotion. To set the TV for Home use . . .
Advanced picture settings Contrast modes Colour settings With Contrast modes, you can set the level at which power consumption can be reduced by dimming the intensity of the screen. Choose for the best power consumption or for the picture with the best intensity. Colour enhancement With Colour enhancement, you can enhance the colour intensity and the details in bright colours. To adjust the level . . . 1 - Press and select Setup and press OK.
4 - Press , repeatedly if necessary, to close the menu. select Maximum, Medium, Minimum or Off. 4 - Press , repeatedly if necessary, to close the menu. Gamma Motion settings With Gamma, you can set a non-linear setting for picture luminance and contrast. Gamma is a setting intended for expert users. HD Natural Motion With HD Natural Motion, you can reduce the motion judder, visible in movies on TV. To adjust the level . . . 1 - Press and select Setup and press OK.
Location Sound settings If the TV is located in a shop, you can set the TV to display an in store promotion banner. The Picture style is set to Vivid automatically. The automatic Switch off timer is switched off. Bass To set the TV to Shop location . . . To adjust the level . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Location and press OK. 3 - Select Shop and press OK. 4 - Press , repeatedly if necessary, to close the menu.
1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Advanced > Auto volume leveling. 3 - Press (right) and select On or Off. 4 - Press , repeatedly if necessary, to close the menu. For more information, press Keywords and look up HDMI ARC. Audio out format With Audio out format you can set the audio out signal of the TV to fit the sound processing capabilities of your Home Theatre System.
To select a wireless speaker to play the TV sound… • Places with a high amount of wireless activity - apartments with lots of wireless routers - can hamper the wireless connection. Keep the router and wireless speaker as close to the TV as possible. 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Sound output. 3 - Press (right) and select Wireless sound. 4 - Select the name of the wireless speaker and press OK. The TV speakers will switch off.
4 - Press , repeatedly if necessary, to close the menu. 1 - Press and select Setup and press OK. 2 - Select Channel settings > Languages > Audio description > Speakers / Headphones and press OK. 3 - Select Speakers, Headphones or Speakers + headphones and press OK. 4 - Press , repeatedly if necessary, to close the menu. 20.4 Universal access Switch on Visually impaired With Universal access switched on, the TV is set for use for hearing and visually impaired people.
If Universal access does not appear in the Options menu, switch on Universal access in Setup. For more information, press Keywords and look up Universal access.
21 European energy label Specifications The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV 21.
COFDM 2K/8K; DVB-C (cable) QAM - For model name with PxT: DVB-T2; DVB-C (cable) QAM • Analogue video playback : NTSC; SECAM; PAL • Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2); MPEG4 SD/HD (ISO/IEC 14496-10) • Digital audio playback (ISO/IEC 13818-3) • Display resolution : - PFxxxx9 : 1920x1080p - PHxxxx9 : 1366x768p Input resolution for HD/FHD TVs Note: See selected countries on the TV type plate Video formats 21.
Width 725.7 mm - Height 429.2 mm - Depth 55.4 mm - Weight ±5.17 kg • with TV stand: Width 725.7 mm - Height 484.6 mm - Depth 179.4 mm Weight ±6.
22 Update from Internet Software If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software. You need a high-speed (broadband) Internet connection. 22.1 Software update If you receive this message, we recommend you carry out the update. Select Update. Follow the instructions on screen. Update from USB You can also look for new updates yourself. To look for an update . . . It might be necessary to update the TV software.
This is a document describing the distribution of the source code used on the Philips TV, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain source code for this software can be found in the user manual. animation extension to the popular PNG image-format. This piece of software is made available under the terms and conditions of the libmng license, which can be found below.
windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications. This piece of software is made available under the terms and conditions of the DirectFB license, which can be found below. Source: http://sourceforge.net/projects/jointspace/files/remote_a pplications_SDK/remote_spplications_SDK_v1.3.1/DirectFB141_ source_1.3.1.7z/download routines for read, write and erase.
Source: http://sourceforge.net/projects/linux-ntfs A library provides an encrypted filesystem in user-space. Source: http://www.arg0.net/encfs fuse (2.8.4) Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel. This piece of software is made available under the terms and conditions of the fuse license, which can be found below. Source: http://fuse.sourceforge.net/ boost (1.15.
The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines. Source: http://www.gnu.org/software/grep/ text. sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file. Source: http://www.gnu.org/software/sed/ gzip (1.3.12) GNU Gzip is a popular data compression program originally written by Jean-loup Gailly for the GNU project.
ezxml (0.8.6) ezXML is a C library for parsing XML documents. Used inside Philips libraries. Source: http://sourceforge.net/projects/ezxml/ jquery (1.10.2) jQuery is a fast and concise JavaScript Library that simplifies HTML document traversing, event handling, animating, and Ajax interactions for rapid web development. Source: http://jquery.com/ SQLite (3.7.7.1) SQLite is a in-process library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine.
When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press on the remote control or the TV. 23 Troubleshooting and support The standby light keeps on blinking Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care. 23.
Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. 23.3 Help Computer picture is not stable This TV offers help on screen. Make sure that your PC uses the supported resolution and refresh rate. Open Help 1 - Press to open the Home menu. 2 - Select Help and press OK. Connections To look up topics alphabetically, select Keywords. To read the Help as a book, select Book.
23.5 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Warning Do not attemp to repair the TV yourself.
24 Risk of injury or damage to the TV Safety and care • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects.
All Rights Reserved. Microsoft Skype Skype™ Windows Media © 2013 Skype and/or Microsoft. The Skype name, associated trade marks and logos and the "S" logo are trade marks of Skype or related entities. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Skype is a trademark of Skype or its related companies.
pending applications in other countries throughout the world. Other trademarks All other registered and unregistered trademarks are the property of their respective owners.
Index Contrast, Dynamic contrast 65 Contrast, Gamma 66 Contrast, Video contrast 65 A Active control 64 Activity style 66 Amplifier, audio system 68 Antenna connection 7 Antenna connection, tips 11 App, gallery 60 App, rental videos 60 Apps, feedback 60 Apps, lock 62 Apps, open 64 Apps, recommended 66 Apps, search 68 Audio commentary 70 Audio description 72 Audio language 29 Audio Out - Optical 12 Audio to video sync 15 Auto subtitle shift 13 Auto volume levelling 67 Automatic channel update 30 D Digital T
Keyboard, connect 18 Quick picture settings 63 L R Language, audio 31 Language, menus and messages 29 Language, original 33 Location 67 Radio channel 27 Reception quality 32 Recording, list of recordings 50 Recording, record now 50 Recording, schedule a recording 50 Recording, Skype calls 55 Recording, watch a 51 Recording, what you need 50 Recording, what you need 17 Red button 33 Rename channels 28 Rental videos 62 Repair 87 M Manual installation 33 Media servers, supported 76 Menu language 31 Mirac
Smart TV, start page 61 Sound style 67 Standby 24 Subtitles 28 Subtitles, pause TV 51 Subtitles, recording 50 Support, online 84 Surround mode 69 Switch off timer 44 Switching on 26 Symbol rate 32 Symbol rate mode 34 Synchronise audio and video 17 T Teletext 29 Text 31 Treble 67 TV clock 46 TV guide 42 TV guide, clock 48 TV network name 13 TV on Demand 63 TV placement 6 TV placement 69 TV speakers 70 Twitter 63 U Unicable 39 Universal access 70 Universal access, audio effect 70 Universal access, hearing i
Powered by TCPDF (www.tcpdf.org) Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245 Sao Paulo 2938 0245 Бълария 02 4916 273 (Национален номер) Česká republika 228880895 (Místní tarif) Danmark 3525 8314 Deutchland 0180 501 04 69 (0,14€/Min.) Ελλάδα 2111983028 (Εθνική κλήση) España 902 88 10 83 (0,10€ + 0,08€/min.