User Manual

Software Upgrade with Portable Memory
Note: You can upgrade the software of you TV by
using the USB port on the side of the set. Using the
USB as described below to upgrade software does
not affect your warranty. It is located near the
service port identified in the user manual for repair
center use only.
Introduction
Philips offers software upgrade capability for your
TV using USB portable memory (not supplied).
After you have completed software upgrade, your
TV will typically perform better.
What improvements are made depends on the
upgrade software you are using as well as the
software your TV contained before the upgrade.
You can execute the software upgrade procedure
yourself.
Be aware that the content of this document is
addressing technical or software skilled users.
Fig. 1
Preparing a portable memory (not supplied)
for software upgrade
For the procedure you will require:
·A personal computer with web browsing capability.
·An archive utility that supports the ZIP-format (e.g.
WinZip for Windowsor StuffIt for Mac OS).
·A preferably empty USB memory stick.
Note: Only FAT/DOS-formatted portable memory is
supported.
New software can be obtained from your dealer or
can be downloaded from the
www.philips.com/support
web site:
Fig. 2
1. Go to www.philips.com/support using the web
browser on your PC.
2. Follow the procedure to find the information and
the software related to your TV.
3. Select the latest software upgrade file and
download it to your PC.
4. Decompress the ZIP-file and copy the file
autorun.upg to the root directory of the USB
portable memory (not supplied).
Note: Only use software upgrades that can be found
on the www.philips.com/support
web site.