Service manual

Double Window (DW) Panel Removal
Figure:
1. Remove the 'DW panel/3D comb filter panel' bracket from the bottom tray by
pulling the release handle [1] backwards. The release catch is lifted by this.
2. The board can easily be lifted out of the bracket after releasing the 2 securing
clamps [2].
3. Both sides of the panel are easily accessible.
3D-Comb Filter Panel Removal
1. Pull the release handle [1] backward and remove the 'DW panel/3D comb filter
panel' bracket from the bottom tray.
2. Remove the 3D comb filter panel from the guiding slots, while with releasing the
2 securing clamps [3].
3. The smallest PWB is easily accessible. The biggest PWB is a panel that must be
replaced if it is defective. For that reason, accessibility is less important (the
interfacing connection is sufficient).