Service manual

Error Device Description Def. item Diagram
13 TEDE9 Main Tuner 1200 A7
14 MSP3415D MSP34xx 7651 B6
15 NA NA NA NA
16 TELE9 PIP Tuner 1900 L1
17 M65669 Multi PIP IC 7803 L2
18 TEA6425 PIPVideo Matrix IC 7910 L1
30 TDA9320
HIP I/O video
processing
7323 B2
31 SAA4978 PICNIC 7709 B3
32 TDA9330
HOP video
control/geometry
7301 B4
35 M62320 IO expander HD Jack 7106 N1
Explanation of error codes:
Error 0
No errors
Error 1
This protection is activated when the PICNIC (pos. 7709 on diagram B3) cannot
communicate via I
2
C for a certain time. This could mean that stabilizer 7009 or 7713 on
SSB is defective (dependent of variant). When there is a short circuit to ground behind
the stabilizer, 7009 or 7713 could become very hot. For safety reasons, the set will be
switched to protection mode.