Service manual

Error 10
Non Volatile Memory (EEPROM - pos. 7012) does not respond to the microcontroller.
Error 11
During the last startup, the NVM and the microcontroller did not recognize each other
(e.g., one of them was replaced or the NVM memory has been changed/adapted or
lost), therefore the NVM was loaded with default values.
Error 12
Microprocessor (Painter - pos. 7001) internal RAM test failure.
Error 13
Tuner (pos. 1200) is corrupted, the I
2
C line to the tuner is low, or there is no supply
voltage at pins 7, 4, and 5 of the tuner.
Error 14
Sound controller MSP34xx (pos. 7651) does not respond to the microcontroller.
Error 16
The Tuner (pos. 1900) on the PIP panel does not respond to the microcontroller.
Error 17
Multi PIP IC M65669 I
2
C communication failure (pos. 7803 on the PIP panel).
Error 18
I/O expander IC TEA6425 I
2
C communication failure (pos. 7910 on the PIP panel).
Error 30
TDA 9320 HIP I/O video processing (pos. 7323 on the SSB).