Service manual

Changes in the option byte settings are saved by leaving the OPTION submenu. Some
changes will only take effect after the set has been switched off by breaking the AC
mains supply (cold start).
Option bits/bytes
An option byte value is calculated in the following way:
Value 'option bit 1' x 1 =
Value 'option bit 2' x 2 =
Value 'option bit 3' x 4 =
Value 'option bit 4' x 8 =
Value 'option bit 5' x 16 =
Value 'option bit 6' x 32 =
Value 'option bit 7' x 64 =
Value 'option bit 8' x 128 =
========================
Total: value 'option byte' =
Table: Option code settings
Model Number OB1 OB2 OB3 OB4 OB5 OB6 OB7 OB8
27PT830H37C 254 123 222 94 0 0 0 0
32PT740H37A 254 123 223 94 0 0 0 0
32PT830H37A 254 123 223 94 0 0 0 0
32PT842H37A 254 127 250 251 32 0 0 0
36PT842H37D 254 127 250 251 32 0 0 0
Software version used: 2U1. Below are the option definitions for both type numbers.