Operation Manual

Ambilight settings
Ambilight brightness
With Ambilight
Brightness
, you can set the level of brightness of
the Ambilight.
To adjust the level . . .
1 - Press

and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Brightness
.
3 - Press
OK
and adjust the value with

(up) or

(down).
4 - Press

, repeatedly if necessary, to close the menu.
Ambilight saturation
With Ambilight
Saturation
, you can set the level of saturation of
the Ambilight.
To adjust the level . . .
1 - Press

and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Saturation
.
3 - Press
OK
and adjust the value with

(up) or

(down).
4 - Press

, repeatedly if necessary, to close the menu.
Ambilight+hue
What you need
With
Ambilight+hue
, you can set up your
Philips Hue
lamps to
follow the
Ambilight
colours of the TV. The Philips Hue lamps
will expand the Ambilight effect across the room. If you don’t
have any Philips Hue lamps yet, buy the
Philips Hue Starter Kit
(includes a hue bridge and 3 hue bulbs) and install the bulbs and
bridge. You can buy extra Philips Hue bulbs separately.
To set up Ambilight+hue on your TV you need…
• a Philips Hue bridge
• a few Philips Hue bulbs
• this TV connected to your home network
You can do the complete Ambilight+hue setup on TV and don’t
need the Ambilight+hue App.
If you do download the free
Ambilight+hue App
on your
smartphone or tablet later, you can use this App to adjust some
Ambilight+hue settings.
Configure
Configuration steps
To configure
Philips Hue
bulbs as
Ambilight+hue
bulbs, follow
the steps on the following pages…
1 - Network
2 - Hue bridge
3 - Hue bulbs
4 - Configure bulb
Network
In this first step, you will prepare the TV to find the
Philips Hue
Bridge
.
The TV and the Philips Hue Bridge must use the same network.
Connect the Philips Hue Bridge to the router — the router of
the network the TV is using.
Switch on the hue bulbs.
To start the configuration…
1 - Press

(Ambilight) and select on any Ambilight Style.
2 - Press

and select
Setup
and press
OK
.
3 - Select
TV settings
>
Ambilight
>
Ambilight+hue
and press
OK
.
4 - Select
Ambilight+hue
one step further, select
On
and press
OK
.
5 - Select
Configure Ambilight+hue
and press
OK
.
If the TV is connected to your home network, it will start
looking for the Philips Hue Bridge immediately.
If the TV is not yet connected to your network, the TV will start
the network setup first. You must connect the TV to your home
network.
With the TV connected to your network, go to page
Hue
Bridge
.
For more info on connecting the TV to your home network,
press

Keywords
and look up
Network, wireless
.
Hue Bridge
In the following step, you will link up the TV with the
Philips
Hue Bridge
.
The TV can only be linked up to one Hue Bridge.
To link the Hue Bridge…
1 - With the TV connected to the network, it will show the
available Hue Bridges. If the TV did not find your Hue Bridge yet,
you can select
Scan again
and press
OK
.
If the TV found the only Hue Bridge you have, select
Next
and
press
OK
.
If you have more than one Hue Bridge available, press

(up) or

(down) to select the Hue Bridge you want to use and then
select
Next
and press
OK
.
2 - After you pressed
OK
, go to the
Philips Hue Bridge
and
press the link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30 seconds. The TV
will confirm if a Hue Bridge is linked to the TV.
3 - On this confirmation, select
OK
and press
OK
.
With the Philips hue bridge linked to the TV, go to page
Hue
bulbs
.
77