Operation Manual

Hue bulbs
In the following step, you will select the
Philips Hue bulbs
that
have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Ambilight+hue.
To select the bulbs for Ambilight+hue…
1 - In the
Configure Ambilight+hue
menu, select
Hue bulbs
and
press
OK
.
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press
OK
.
3 - When you’re done, select the
OK
button and press
OK
.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb
.
Configure bulb
In the following step, you will configure each
Philips Hue bulb
.
To configure each Hue bulb…
1 - Select the bulb name in the
Configure Ambilight+hue
menu
and press
OK
. The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the
Angle
will send the correct Ambilight
colour to the bulb. Press

(up) or

(down) to adjust.
3 - Press

(right) to set the distance.
4 - Secondly, indicate the
Distance
between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
colour. Press

(up) or

(down) to adjust.
5 - Press

(right) to set the brightness.
6 - Finally, set the
Brightness
of the bulb. Press

(up) or

(down) to adjust.
7 - To stop configuring this bulb, select
OK
and press
OK
.
8 - In the
Configure Ambilight+hue
menu, you can select every
bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select
Finish
and press
OK
.
Ambilight+hue is ready for use.
You can always change the Ambilight+hue configuration later.
To change the configuration, press

and select
Setup
>
TV
settings
>
Ambilight
>
Ambilight+hue
> Configure
Ambilight+hue.
Immersion
With
Immersion
, you can adjust the level of the Ambilight effect
for the Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion…
1 - Press

and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Ambilight+hue
>
Immersion
and press
OK
.
3 - Press

(up) or

(down) to adjust.
4 - Press

, repeatedly if necessary, to close the menu.
Info
In
View configuration
, you can consult the current
Ambilight+hue configuration. Which network you use, how
many bulbs are connected, etc.
To view the current Ambilight+hue setup…
1 - Press

and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Ambilight+hue
>
View
configuration
and press
OK
.
3 - Select the item you want to view and press
OK
.
4 - Press
,
repeatedly if necessary, to close the menu.
Advanced Ambilight settings
Wall Colour
With
Wall Colour
, you can neutralise the influence of a
coloured wall on the Ambilight colours. Select the colour of the
wall behind the TV and the TV will modify the Ambilight colours
to appear as they are intended.
To select the colour of the wall . . .
1 - Press

and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Advanced
>
Wall Colour
.
3 - Select the colour sample that matches the colour of the wall
behind the TV and press
OK
.
4 - Press

, repeatedly if necessary, to close the menu.
TV switch off
With
TV switch off
, you can set Ambilight to switch off
immediately or slowly fade out when you switch off the TV. The
slow fade out gives you some time to switch on the lights in
your living room.
To select the way how Ambilight switches off…
1 - Press

and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Advanced
>
TV switch
off
.
3 - Select
Fade out to off
or
Immediate switch off
.
4 - Press

, repeatedly if necessary, to close the menu.
Lounge light mood
When the TV is on standby, you can switch Ambilight on and
create a Lounge light effect in your room.
To switch Ambilight on while the TV is on standby, press

(Ambilight).
To change the Lounge light colour range, press

(Ambilight) again.
78