User manual
47
Settings
Table of contents
5
Press + / – to select from the following settings: Off (DVT4000),
Auto Adjust Rec (DVT6000 – DVT8000), 8s, 20s, On.
Tip
• DVT6000 – DVT8000: The device has an integral brightness
sensor. The setting
Auto Adjust Rec is used to automatically
match the brightness of the backlight to the ambient brightness.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.2.4 Setting Demonstration mode
Using Demonstration mode you can display images on the screen.
Note
• The images, with the following properties, must be stored in the
root directory of the device: File format: 24 bit .bmp; resolution:
128 × 160 pixels; File name: 01.bmp, 02.bmp, … .
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu Ô.
3
Press h / b to select the function Demo Mode.
4
Press the record key, g, to confirm.
5
Press h / b to select the function On.
6
Press the record key, g, to confirm.
X If this feature is on, the saved images are output sequentially
to the display.
7
Press the ~ key to end demonstration mode.
8
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.