User manual

User Manual LivingColors Micro

Unpacking and Installing

If you unpack a LivingColors, you only need to plug the cable into the back of the product, connect it to the power system and start the

experience!

Step 1: Place your LivingColors in a selected location on a at and stable surface and direct it to the wall.

Step 2: Plug the cable into the back of the product.

Step 3: Plug your LivingColors into the power system.

Getting started with your LivingColors

PAGE 1
User Manual LivingColors Micro Getting started with your LivingColors Unpacking and Installing If you unpack a LivingColors, you only need to plug the cable into the back of the product, connect it to the power system and start the experience! = + + Step 1: Place your LivingColors in a selected location on a flat and stable surface and direct it to the wall. Step 2: Plug the cable into the back of the product. Step 3: Plug your LivingColors into the power system.
PAGE 2
Basic functionality Turn the LivingColors “On” or “Off”: Your LivingColors can be turned “On” and “Off ” by using the “I/0”-button on the back of the product or even by just selecting a colour on the colour strip. If you turn the LivingColors “Off ”, it will remember your last setting for the next time you use it. Colour selection: To let your LivingColors change to whatever colour you like, simply select the colour on the colour strip by touching it.
PAGE 3
To exit the Automatic Colour Change Mode, simply use the “I/0”-button to turn the product off and select a colour to turn it back on. The Automatic Colour Change Mode is now stopped. = Problem solving Reset the luminaire by unplugging it from the power network. Wait for 30 sec and plug it back in.