User Guide
Table Of Contents
- 1 Important
- 2 Your air purifier
- 3 Getting started
- 4 Using the air purifier
- 5 Cleaning
- 6 Replacing the filter
- 7 Storage
- 8 Troubleshooting
- 9 Guarantee and service
- 10 Notices
- 1 Маңызды ақпарат
- 2 Ауа тазартқыш
- 3 Іске қосу
- 4 Ауа тазартқышты қолдану
- 5 Тазалау
- 6 Сүзгіні ауыстыру
- 7 Сақтау
- 8 Ақауларды жою
- 9 Кепілдік және қызмет көрсету
- 10 Ескертулер
- 1 Внимание
- 2 Ваш очиститель воздуха
- 3 Начало работы
- 4 Эксплуатация очистителя воздуха
- 5 Очистка
- 6 Замена фильтра
- 7 Хранение
- 8 Устранение неисправностей
- 9 Гарантия и обслуживание
- 10 Примечания
7 Storage
1 Turn off the air purifier and unplug
from the wall outlet.
2 Clean the air purifier, air quality
sensor and pre-filter (see chapter
‘Cleaning’).
3 Let all parts dry thoroughly before
storing.
4 Wrap the filter and pre-filter
separately in air tight plastic bags.
5 Store the air purifier, the filter and
pre-filter in a cool, dry location.
6 Always thoroughly wash hands
after handling filters.
Filter alert light
status
Action
A3 displays on
the screen
Replace
NanoProtect filter
HEPA Series 3
(FY1410)
C7 displays on
the screen
Replace the
NanoProtect filter AC
(FY1413)
A3 and C7
display on
the screen
alternately
Replace both filters
1 Turn off the air purifier and unplug
from the wall outlet.
2 Take out the used air filter according
to the filter alert light status
displayed on the screen (Fig.y ).
Discard used filter.
Note
• Do not touch the pleated filter
surface, or smell the filter as it has
collected pollutants from the air.
3 Remove all packaging material from
the new filter (Fig.f).
4 Place the new filters into the air
purifier (Fig.g).
5 Put the plug of the air purifier in the
wall outlet.
6 Touch the for 3 seconds to reset
the filter lifetime counter (Fig.z).
7 Wash your hands after changing a
filter.
11EN
English