User Guide
Table Of Contents
- 1 Important
- 2 Your air purifier
- 3 Getting started
- 4 Using the air purifier
- 5 Cleaning
- 6 Replacing the filter
- 7 Storage
- 8 Troubleshooting
- 9 Guarantee and service
- 10 Notices
- 1 Маңызды ақпарат
- 2 Ауа тазартқыш
- 3 Іске қосу
- 4 Ауа тазартқышты қолдану
- 5 Тазалау
- 6 Сүзгіні ауыстыру
- 7 Сақтау
- 8 Ақауларды жою
- 9 Кепілдік және қызмет көрсету
- 10 Ескертулер
- 1 Внимание
- 2 Ваш очиститель воздуха
- 3 Начало работы
- 4 Эксплуатация очистителя воздуха
- 5 Очистка
- 6 Замена фильтра
- 7 Хранение
- 8 Устранение неисправностей
- 9 Гарантия и обслуживание
- 10 Примечания
Problem Possible solution
The color of the air
quality light always
stays the same.
• The air quality sensor is dirty. Clean the air quality sensor
(see chapter "Cleaning").
The air purier
produces a
unpleasant smell.
• The first few times you use the air purifier, it may produce
a plastic smell. This is normal. The air purifier may also
produce an unpleasant smell when the filter is dirty. In this
case, clean or replace the appropriate filter.
• If the air purifier produces a burnt odor, switch OFF and
unplug from the electrical outlet. Contact the Consumer
Care Center in your country.
The air purier is
loud.
• If the air purifier is too loud, change the fan speed to a
lower fan speed level. When using the air purifier in a
bedroom at night, choose the night sensing mode or select
a lower fan speed level.
The air purier still
indicates that I
need to replace a
lter, but I already
did.
• Perhaps you did not reset the filter lifetime counter. Plug
in the air purifier, touch to switch on the air purifier, and
touch the for 3 seconds.
Error codes "E1",
"E2", "E3" or "E4"
displays on the
screen.
• The air purifier has malfunctions. Contact the Consumer
Care Center in your country.
13EN
English