User Guide

Problem Possible solution

The air purier

produces a

unpleasant smell.

• The lter may produce smell after being used for a while

because of the absorption of indoor air. Remove the lter

and place it where it has direct sunlight and ventilation for

several hours. Re-install and try using it again. However,

if the appliance produces a burnt smell even if removing

lters, contact your Philips dealer or an authorized Philips

service center.

• If the air purier produces a burnt odor, switch OFF and

unplug from the electrical outlet. Contact Consumer Care

Center in your country.

The air purier is

loud.

• If the air purier is too loud, change the fan speed to a

lower fan speed level. When using the air purier in a

bedroom at night, choose the night sensing mode or select

a lower fan speed level.

The air purier still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the lter lifetime counter. Plug

in the air purier, touch to switch on the air purier, and

touch and hold the for 3 seconds.

Error codes "E1",

"E2", "E3" or "E4"

displays on the

screen.

• The appliance has malfunctions. Contact the Consumer

Care Center in your country.

English