Register your product and get support at AJ290 EN User manual
English 1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
when moving the cart/apparatus combination to avoid injury from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
r Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• •• •• •• •• Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. Keep this apparatus away from direct sunlight, naked flames or heat. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.
product helps prevent potentially negative consequences on the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Environmental information All unnecessary packaging has been omitted.
• • • set an alarm timer to wake you up know the outdoor weather condition know the indoor temperature and humidity. What’s in the box Check and identify the contents of your package: • Main unit • Power adaptor • Outdoor sensor • User manual and Quick start guide Overview of the main unit a ALARM RESET • Stop the alarms for 24 hours.
b DISPLAY • Toggle between outdoor temperature, indoor temperature, and indoor humidity. c DATE • Toggle between month, day, alarm 1 and 2. • Receive transmission from the sensor. / d • Adjust clock/alarm time. e SET TIME • Set clock/date. • Activate RCC (Radio Control Clock) reception. f Display panel • Show the time/date/weather information. g Battery compartment h DC socket i °C/°F slide • Toggle between Centigrade (°C) and Fahrenheit (°F) temperature.
j RESET • Reset to start transmission. • Reset the unit when it hangs up. k AL 1/2 • Turn on/off alarm 1/2. • Confirm alarm setting. l REPEAT ALARM/BRIGHTNESS CONTROL • Repeat the alarms. • Adjust brightness of the display panel. Overview of the sensor e a b c d g f a Display panel • Display the current temperature. • Display low battery indication. b LED light • Blink when the sensor synchronizes with the main unit.
e RESET • Reset to start transmission. f Sensor support g Door lock 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
To install batteries into the main unit 1 2 Open the battery compartment. 3 Close the battery compartment. Insert 4 AAA batteries (not supplied) with correct polarity (+/-) as indicated. To install batteries into the sensor 1 2 Open the battery compartment. 3 Close the battery compartment. Insert 2 AA batteries (not supplied) with correct polarity (+/-) as indicated.
Note •• Batteries contain chemical substances, so they should be disposed of properly. Mount on wall You can also mount the main unit on a wall. 1 2 Choose a location on the wall. Clinch two screws into the wall. 48 mm (1.89") 3 Hook the main unit on the wall. Tip •• Ensure the distance between the screws is 48 mm, and leave at least 5 mm to mount the main unit on.
Install the stand The battery compartment cover can be installed with the inside out to support the unit. Connect power Caution •• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •• Before connecting the AC adaptor, ensure you have completed all other connections.
Connect the sensor to the main unit Note •• Ensure the sensor is loaded with batteries. 1 • Place the sensor to a desired location, within 10 meters away from the main unit. For first time use, press RESET on both the main unit and the sensor. »» The main unit starts to receive transmission from the sensor. • To update the outdoor temperature, press an hold DATE.
4 Set time and date Set date and time automatically 1 Press and hold SET TIME for 2 seconds. »» The clock automatically synchronizes the current Central European time and date. Set date and time manually 1 2 3 4 5 Press SET TIME. »» Year digits begin to blink. Press / to set year. Press SET TIME to confirm. Repeat the above steps to set the month, day, hour, and minute. Set the alarm timer Note •• Before you start, ensure that the clock is set correctly. You can set two separate alarm timings.
4 Press / to set the minute, then press AL 1/AL 2 to confirm. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. »» The alarm repeats ringing 9 minutes later. Turn on/off the alarm timer Note •• Ensure that you already set the alarms successfully. Press AL 1/AL 2 repeatedly to turn on or off the alarm timer. AL1 or AL2 appears. »» If the alarm timer is turned on, »» If the alarm timer is turned off, 6 disappears.
Tip •• If channel is swifted,you need to unplug the adaptor and connect power again. Adjust display infomation 1 Press DISPLAY repeatedly to toggle between outdoor temperature, indoor temperature and humidity. Weather forecast The unit predicts weather for an area of 50 km in the next 12 or 24 hours.
Symbol Weather Light color Snow White Tip •• When the main unit is powered by battery, the light turns on for 10 seconds after any operation. •• When powered by AC mains supply, the light always turns on. •• To activate the auto dim function, press and hold REPEAT ALARM/ BRIGHTNESS CONTROL for 10 seconds. Adjust display brightness 1 7 Press REPEAT ALARM/BRIGHTNESS CONTROL repeatedly to select different levels of display brightness.
General information Power adapter Input: 220-230 V~50 Hz, 30 mA Output: 6Vdc - 200 mA Model No.: 3515-0620-ADC Power Consumption 1.2 W Dimensions - Main Unit (W x H x D) - Sensor (W x H xD) 169 x 111 x 28 mm 80 x 80 x 22 mm Weight 0.3 kg 8 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service.
•• •• Insert the batteries with their polarities (+/– signs) aligned as indicated. Replace the battery. Timer does not work •• Set the clock correctly. •• Switch on the timer. Clock/timer setting erased •• Replace the exhausted battery. •• Reset the clock/timer. Display does not function properly./No reaction to any operation of the controls. •• Press RESET on the main unit or the sensor.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. AJ290_12_UM_V1.