AMF220 EN User manual 1 ZH-T 使用手冊 12 This product is only suitable for well insulated spaces or occasional use.
1 Your 3-in-1: air purifier, fan and heater ������������������������������������2 Product overview ������������������������������������������������������������������������������������������������������� 2 Display overview �������������������������������������������������������������������������������������������������������� 3 Controls overview ������������������������������������������������������������������������������������������������������4 2 Getting started ������������������������������
1 Your 3-in-1: air purifier, fan and heater Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Eng l ish Display overview L K M N O K Temperature display N Air quality indicator L Child lock indicator O Filter replacement alert M PM2.
Controls overview 4 Short press Timer Oscillation Press for 3 seconds Sleep Light on/off Reset filter lifetime EN Fan setting Heater setting Child lock On/off
Getting started Eng l ish 2 Installing the filter Note: Make sure the appliance is unplugged from the electrical outlet before installing the filter. 1 1 2 3 4 5 2 3 4 5 To remove the back cover, hold the side of it with both hands and pull. Pull the filter from the appliance. Remove all packaging materials from the filter. Put the filter back into the appliance. Reattach the back cover. Setting up the remote control 1 2 Pull out the plastic film on the remote control to activate the battery.
Turning on and off Note: • Plug the appliance into the power outlet; do not use a power strip. • If the appliance is running in heating mode when you turn it off, it continues working for a few seconds to exhaust the remaining heat. 1 2 3 Press to switch on the appliance. The display panel lights up, and appliance shows the PM2.5 level and temperature. Press to switch off the appliance.
1 2 Eng l ish Sleep, turning light on/off Press and hold the button for 3 seconds. » The display screen dims, rest lights will turn off. Press any button to turn all lights on. 3s Pairing your remote control 1 2 X2 5s 1 2 Unplug the appliance from the power outlet and wait for 10 seconds. Plug in the appliance, then within 5 seconds,press the button on the appliance twice. » The 2h indicator lights up. Long press the button for 5 seconds on the remote control within 5 seconds.
4 Cleaning and maintenance Note: Switch off the appliance and unplug it from the power outlet before continuing. Cleaning the body of the appliance Use a soft, dry cloth to clean the appliance surface, including air inlet and outlet. Clean particle sensor surface. Do not open particle sensor cover. Cleaning the filter surface Clean the filter surface with a vacuum cleaner or brush every two weeks. 1 1 2 3 4 5 6 2 3 4 Pull the back cover and remove it from the appliance.
4 Press and hold the button for 3 seconds to reset the filter replacement time. » The filter replacement alert disappears from the screen. Wash your hands thoroughly after replacing the filter. 4 3 Eng l ish 3 3s Before the filter replacement alert lights up You can replace the filter before the filter replacement alert ( ) lights up. If you do this, you need to reset the filter lifetime counter manually. 1 Unplug the appliance from the power outlet and wait 10 seconds.
Problem Possible solution The air quality does not improve even though the appliance has been operating for a long time. • Check whether the packing material is removed from the filter. • Check whether the filter is installed in the appliance. • Clean the sensor cover surface with mop or vacuum cleanser; Do not open sensor cover or touch inside. • Room size is too large, or the outdoor air quality is poor. For optimum purification performance, close the doors and windows when operating the appliance.
Eng l ish Information requirements for electric local space heaters Model identifier(s): AMF220 Item Symbol Value Unit Heat output Item Unit Type of heat input, for electric storage local space heaters only (select one) Nominal heat output P nom 2,1 kW manual heat charge control, with integrated [no] thermostat Minimum heat output (indicative) P min 1,2 kW manual heat charge control with room and/ or outdoor temperature feedback [no] Maximum continuous heat output P max, C 1,8 kW ele
目錄 1 您的 3 合 1 風扇、暖風空氣清新機 ......................................13 產品概要 .........................................................................................................13 顯示概覽 ........................................................................................................ 14 控制鍵概覽 ................................................................................................... 15 2 使用入門 ..................................................................................... 16 安裝濾網 .......
1 您的 3 合 1 風扇、暖風空氣清新機 感謝您購買 Philips 產品,同時歡迎您來到 Philips 世界! 請前往以下網址註冊您的產品,以獲得 Philips 的完整支援: www.philips.
顯示概覽 L K M N O 14 K 氣温顯示 N 空氣質素顯示 L 兒童安全鎖指示燈 O 濾網更換 警示 M PM2.
繁體中文 控制鍵概覽 短按 定時器 擺動 長按 3 秒 睡眠 開燈/關燈 重設濾網壽命 風扇設定 暖風設定 開啟/關閉 兒童安全鎖 ZH-T 15
2 使用入門 安裝濾網 備註:安裝濾網前,請確保將產品的插頭從電源插座拔出。 1 1 2 3 4 5 2 3 4 5 請用雙手抓緊產品的兩側,然後拉出以拆卸後蓋。 從產品拉出濾網。 從濾網移除所有包裝物料。 將濾網裝回本產品。 重新裝上後蓋。 設定遙控器 1 2 將遙控器的膠片拉出,以啟用電池。 如果您在同一個房子內擁有多個裝置,則請 將遙控器與產品進行配對(請參閱「配對您 的遙控器」章節)。 備註:將遙控器放入收藏槽中,它會自動地卡合穩固。 3 使用 3 合 1 風扇、暖風空氣清新機 空氣質素燈 PM2.
開關 備註: • 將產品插頭插入電源插座;切勿使用拖板。 • 如關閉產品時正在使用暖風模式,產品將繼續工作數秒,以將剩餘的暖風 排出。 按 以開啟本產品。 顯示面板會亮起,然後產品會顯示 PM2.
睡眠、開燈/關燈 1 2 按住 按鈕 3 秒。 » 顯示螢幕會變暗,其他燈光將會關閉。 按動任何按鈕以亮起所有燈光。 3s 配對您的遙控器 1 2 X2 5s 1 2 將產品插頭從電源插座拔出,並等待 10 秒。將產品插頭插入電源,然後在 5 秒 內按下 按鈕兩次。 » 2 小時指示燈會亮起。 在 5 秒內,長按遙控器的 按鈕 5 秒。 » 產品上風扇按鈕的 及 指示燈會亮起,然後產品會以風扇模式運作, 表示配對成功。 備註: 如果「2h」指示燈在閃爍,您必須重複進行配對。 更換電池 1 2 2 1 1 2 3 輕推電池支架的邊緣,然後將其從遙控器中拉出。 如圖所示,依照正確的極性插入新電池。 將電池支架放回遙控器。 18 ZH-T 3
4 清潔及保養 備註:請先關閉產品並從電源插座拔出插頭,然後繼續進行操作。.
濾網更換 當濾網更換指示燈亮起時 備註: • 請勿清洗或重用濾網。 • 切勿用鼻子聞濾網,因為其含有空氣污染物。 當螢幕的 燈亮起時,請更換濾網。 1 使用 Philips 濾網 (FYM220/30) 進行更換。按照「安裝濾網」 章節的說明進行操作。 2 按 以開啟本產品。 3 4 按住 按鈕 3 秒即可重設濾網更換 時間。 » 螢幕的濾網更換指示燈 將會 消失。 更換濾網後,必須徹底洗淨雙手。 4 3 3s 在濾網更換指示燈亮起之前 ) 亮起之前更換濾網。更換後,您需要手動重設濾網壽 您可以在濾網更換指示燈 ( 命計算器。 1 將產品插頭從電源插座拔出,並等待 10 秒。 2 將產品插頭插入電源。 3 開啟電源後 15 秒內,按住 按鈕 3 秒,以重設濾網壽命 計算器。 » 成功重設濾網後,濾網更換指示燈 會閃爍一下。 20 ZH-T
5 疑難排解 問題 可行解決方案 排氣口的氣流明顯 比以前弱。 • 濾網的表面骯髒。請清潔濾網表面(請查看「清潔與保養」 章節)。 即使本產品經過長 時間運作,空氣質 素仍沒有改善。 • 請檢查是否已移除濾網的所有包裝物料。 • 請檢查產品是否已安裝濾網。 • 請以抹布或吸塵機清潔感應器護蓋的表面。 切勿打開感應器護蓋或觸摸其內部。 • 房間面積太大或室外空氣質素太差。 為獲得最佳淨化性能,請在操作產品時關閉門窗。 • 有室內污染源頭。例如包括香煙煙霧、煮食煙霧、香爐、香 水及酒精。 • 濾網的使用壽命經已結束。更換全新的濾網。 本產品發出一陣 怪味。 • 在您最初數次使用本產品時,它可能會發出一點塑膠氣味。 此為正常。 • 如果產品釋出燒灼的氣味,請立即從電源插座拔出插頭並將 其倒置,以檢查是否有異物掉入產品中。如果沒有發現異 物,請聯絡您的 Philips 代理商或認可的 Philips 服務中心。 • 由於吸收了室內氣體,濾網使用一段時間後可能會產生氣 味。建議您將濾網置於陽光下,然後再重新使用。如果仍有 異味,請更換濾網。 產品發出太大的 聲響。 • 如果您選擇以高速運作產品,則
問題 可行解決方案 即使我已替換濾 網,本產品仍表示 需要替換。 • 可能您沒有重設濾網的使用時間。開啟本產品然後,按住 按鈕 3 秒。 暖風功能出現 故障。 • 請檢查進氣口或排氣口是否有阻塞。 • 請檢查濾網表面是否過度骯髒,因而阻塞氣流。如果是,暖 風功能可能會停止運作以保護產品。 22 ZH-T
電子局部暖風機的資料要求 額定暖風輸出 最低暖風輸出(指標) 最大持續暖風輸出 輔助耗電量 於額定暖風輸出 於最低暖風輸出 於待機模式 聯絡詳細資料 標誌 值 單位 項目 單位 暖風輸出,僅適用於局部暖風機(選擇 一項) P 正常 2.1 kW [否] 手動儲熱控制,內置恆溫器 P 最小 1.2 kW [否] 手動儲熱控制以及室內及/或室外溫度 反饋 P 最大,C 1.
© 2020 Koninklijke Philips N.V. All rights reserved.