Service manual
2-5
CS 49 106
CD PLAYER
7
English
1 Set the POWER slider to CD.
2 Press / OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
™ The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the 2; button to start CD play.
™ Display indication: the current track number.
5 Press the 9 button to stop CD play.
™ Display indication: the total number of tracks.
You can interrupt CD play by pressing 2;. Continue CD play by
pressing the button again.
™ Display indication: the current track number (flashing).
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the
POWER
slider.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows E or no. (See
”TROUBLESHOOTING”.)
If you press 2; and there is no CD inserted, the display
shows no.
CD MODE
E
C
ORD
SEARC
H
PLA
Y
RECORD
OPEN
Playing a CD
CD PLAYER
8
English
Selecting another track
Briefly press the ∞ or § button once/several times to skip to the
beginning of the current, previous or subsequent track(s).
During CD play:
CD play continues automatically with the selected track.
When CD play is stopped:
Press 2; to start CD play.
™ Display indication: the selected track number.
Searching for a passage during CD play
1 Hold down the ∞ or § button to find a particular passage in a
forward or backward direction.
™ CD play continues at a low volume.
2 Release the button when you have reached the desired passage.
Note: In the different CD modes or when playing a program, searching
is only possible within the particular track.
1 During CD play press CD MODE repeatedly to cause the display
to show the different playing modes.
™
SHUFFLE: All tracks of the CD (or program) are played in
random order.
™
SHUFFLE REPEAT ALL: All tracks of the CD (or program) are
played repeatedly in random order.
™
REPEAT: The current track is played repeatedly.
™
REPEAT ALL: The entire CD (or program) is played repeatedly.
2 After 2 seconds of flashing display indication, CD play starts in
the chosen mode.
3 To return to normal CD play, press CD MODE until the display
indication disappears.
SHUFFLE
REPEAT
ALL
CD MODE
CD MODE: Shuffle and Repeat
CD MODE
Search backward ∞ and forward §
INSTRUCTION FOR USE