Service manual

2-6
CS 49 107
CD PLAYER
9
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once. A maximum of 20 tracks can be stored in the memory. 1 When CD play is stopped, select the desired track with ∞ or
§.
2 As soon as the number of the desired track is displayed, press
CD MODE to store the track in the memory. ™
PROGRAM appears on the display. P lights up briefly, then the
number of the stored track is shown.
3 Select and store all desired tracks in this way. 4 You can review your settings by pressing and holding CD MODE
for more than 1 second. ™ The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks, the display shows F.
Press 2; to play the program. From the stop position, press 9.
™ no lights up briefly,
PROGRAM disappears and your program
is erased.
Note: The program will also be erased if you:
– interrupt the power supply,
– open the CD compartment, or
– move the
POWER
slider.
PROGRAM
Erasing the program
PROGRAM
Playing the program
PROGRAM PROGRAM
CD MODE
CD MODE: Programming track numbers
English
CASSETTE RECORDER 10
English
1 Set the POWER slider to TAPE. 2 Press STOP·OPEN 9 / to open the cassette compartment.
3 Insert a recorded cassette with the open side upwards and close
the cassette compartment.
4 Press PLAY 1 to start playback.
5 Press 6 or 5 to rewind or fast forward the tape.
6 To stop the tape press STOP·OPEN 9 /.
Note: The keys are released at the end of the tape. Recording is permissible insofar as copyright or other rights of third parties are not infringed upon. For recording on this set you should use a cassette of the type
NORMAL (IEC type I). This deck is not suitable for recording on
cassettes of the type CHROME (IEC type II) or METAL (IEC
type IV). The recording level is set automatically. The controls VOLUME and
DBB do not affect the recording.
At the very beginning and end of the tape, no recording will take place in the 7 seconds during which the leader tape passes the recorder heads. Protecting tapes from accidental erasure
Keep the cassette side to be protected in front of you and snap off the left tab. Now, recording on this side is no longer possible.
To record again on this side of the cassette, cover the opening with a piece of adhesive tape.
General information on recording
PAUSE
STOP•REC
ORD
SEARC
H
PLA
Y
RECORD
OPEN
C
D SYNCHRO START RECORDING
Playing a cassette
INSTRUCTION FOR USE