Philips Professional & Business Solutions EN TYPE Nr. User Manual BDH5031V.
User Manual BDH5031V 1. SAFETY PRECAUTIONS DISPOSAL OF USED ELECTRICAL & ELECTRONIC EQUIPMENT The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
User Manual BDH5031V When unplugging your Monitor, always grip the plug firmly and pull straight out from the socket. • It can result in fire or electric shock due to damaged power cord. When moving your Monitor, remove the power plug, and cables, and be sure to move it by using two people. • Failure to follow this instruction can result in electric shock or personal injury. Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket.
User Manual BDH5031V Do not install the product where there is oil, smog, moist, or dust. • It may cause malfunction. Do not install the product where it will be exposed to the direct sunlight, and the product should not be near heat sources such as radiators, stoves, etc. • It may cause malfunction. For proper ventilation, separate the product from the wall, and keep a distance of more than 10 cm (4 inches). • Due to the increase of temperature inside the Monitor, it may cause fire.
User Manual BDH5031V 1.3 DURING USE Do not open the cover (or back) because high voltage is present within the Monitor enclosure. • It may cause electric shock. Never push any kind of objects into this product through openings at the back of Monitor. • It may cause fire or electric shock. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. • Spilled liquids may cause electric shock or fire.
User Manual BDH5031V Do not disassemble batteries, and do not leave around in case children swallow them. • Heavy metal may contaminate environment, and can be harmful or detrimental to human health. (If children swallow the batteries, go to hospital and consult with a doctor.) Batteries could explode if fitted incorrectly. Align the batteries according to the (+) and (-) indication inside the case. Do not spray water onto the Monitor or wipe with damp cloth. • It may cause an electric shock or fire.
User Manual BDH5031V Do not place heavy objects or heat sources on the power cord. • It may damage the power cord, causing fire or electric shock. Do not place any object or cover on the Monitor. • In an event of improper ventilation, the Monitor will be overheated causing fire. When watching the Monitor, the distance between the Monitor screen and your eye should be 5~7 times the diagonal size of the Monitor. • Watching the Monitor for a long time may hurt your eye sight.
User Manual BDH5031V 2. CHECKING ACCESSORIES 2.1 SUPPLIED ACCESSORIES Check to be sure that the following items are packed with your Plasma panel. 1. Remote Control 2. Batteries 3. EDFU 4. VGA Cable 5. Ferrite Core 6. AC Power Cable (UK, Europe) P.MODE PICTURE FMT AV S.MODE S.
User Manual BDH5031V CONTENTS 1. SAFETY PRECAUTIONS 1.1 1.2 1.3 2. CHECKING ACCESSORIES 2.1 3. SELECTING SOUND MODE CUSTOMIZING SOUND MODE INPUT SIGNAL 8.1 8.2 9. SELECTING PICTURE MODE CUSTOMIZING PICTURE ADJUSTING SCREEN WATCHING A STILL IMAGE WATCHING TWO PICTURES SIMULTANEOUSLY SOUND 7.1 7.2 8.
User Manual BDH5031V 3. PANEL CONTROLS 1 3.1 2 FRONT PANEL * Items having the same name on the plasma display and the remote control would function in exactly the same way. 1. Power control sensor 2.
User Manual BDH5031V HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL VIDEO AUDIO AUDIO SERVICE MENU MENU 2 HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT 3 AV1 MOVE 4 AV2 MOVE 5 6 1 DIGITAL AUDIO OPTICAL VIDEO AUDIO AUDIO SERVICE 7 3.2 8 9 10 11 12 13 REAR PANEL 1. Power cord input 2. AV button 3. Menu button Use this button to enter and exit the MENU. 4.
User Manual BDH5031V 4. REMOTE CONTROL Note: • Use two “AAA” batteries. • Be sure to use replacement batteries of the same type as the original ones. • The life of a battery depends on how much it has been used. 4.1 REMOTE CONTROL Power button - while the AC power cord is connected, turn the display ON (Green light) or OFF (red light stand-by). P.MODE PICTURE FMT AV S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE SWAP RECALL P.
User Manual BDH5031V 4.2 INSTALLING THE BATTERIES IN YOUR REMOTE CONTROL 1. Open the battery compartment on the back of the remote control. 2. Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3. Replace the cover. 4.3 WHEN USING REMOTE CONTROL • Be sure not to allow the remote control to drop or to become wet. • Keep it away from hot or moist locations.
User Manual BDH5031V 5. CONNECTING WITH AN EXTERNAL SOURCE 5.1 WATCHING DIGITAL BROADCASTS • To watch digital broadcasts: - Purchase a separate Digital Broadcasting Receiver (SET-TOP BOX). - Connect the PDP to a Digital Broadcasting Receiver as shown left.
User Manual BDH5031V 5.2 WATCHING CABLE BROADCASTS • To watch cable broadcasts, subscribe to your local cable TV broadcasting, and then connect a cable Broadcasting Receiver to the PDP as shown left. HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL 1. Connect a Cable Broadcasting Receiver to the PDP. • Prepare the A/V cable. • Connect the receiver (Output) to PDP (Video Input) as shown below. VIDEO AUDIO AUDIO SERVICE MENU MOVE • N.B.
User Manual BDH5031V 5.3 WATCHING SATELLITE BROADCASTS • To watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect the satellite Broadcasting Receiver to the PDP as shown left. HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL 1. Connect a Satellite Broadcasting Receiver to the PDP. • Prepare the A/V cable. • Connect the receiver (Output) to PDP (Video Input) as shown left.
User Manual BDH5031V 5.4 WATCHING A DVD IMAGE • Component Input is set to 480i/576i and 480p/576p mode. • Connect the cable from the DVD Video output (Y, Pb/Cb, Pr/Cr) to the Component Input at the back of PDP, and connect the cable from DVD audio output (Left, Right) to the Audio Input at the back of PDP. HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL VIDEO AUDIO AUDIO 1. Connect a DVD Player to the PDP. • Prepare the AV cable.
User Manual BDH5031V 5.5 WATCHING A VCR IMAGE • Video can use either the video terminal or the S-video terminal. HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL 1. Connect a VCR to the PDP. • Prepare the AV cable. • Connect the Video (Output) to PDP (Video Input) as shown left. VIDEO AUDIO AUDIO SERVICE MENU MOVE 2. Press the Power Buttons. • Turn the PDP and the VCR ON. 3. Input Select.
User Manual BDH5031V 5.6 WATCHING A CAMCORDER/GAME CONSOLE IMAGE • Enjoy images recorded by camcorder or the game console after connecting to the PDP. HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL 1. Connect a Camcorder/Game Console to the PDP. • Prepare the AV cable. • Connect the Video (Output) to the PDP (Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. VIDEO AUDIO AUDIO SERVICE MENU MOVE 2.
User Manual BDH5031V 5.7 CONNECTING PC (15 PIN D-SUB) • This product supports resolutions of VGA, SVGA, XGA, WXGA, SXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of the PC. 1. Before Connecting to the PDP, Set the Resolution of the PC. • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY menu. • In the SETTINGS menu, select 640 x 480, 800 x 600, 1024 x 768 or 1280 x 1024 2. Connect the PC to the PDP.
User Manual BDH5031V 3. Press the Power Buttons. • Turn on the PDP and the PC. 4. Input Select. • Select [PC] by pressing the AV button of the remote control or PDP unit. • When you press the “AV” button, you will see the OSD as shown. You can move using “/” and select desire input mode with “/” button. AV 1 Picture AV 2 AV 3 Sound Component PC Screen HDMI • N.B. : You cannot select PC if the picture in picture mode is on. Feature 5.
User Manual BDH5031V 5.8 CONNECTING HDMI • This product supports resolution of VGA, SVGA, XGA, SXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of PC. • This product is supported by Plug and Play only at HDMI. • This Plasma unit is compliant with HDMI 1.1 version. HDMI INPUT PC AUDIO PC IN PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL VIDEO AUDIO AUDIO 1. Connect the HDMI to the PDP. • Prepare the HDMI cable.
User Manual BDH5031V 5.9 CONNECT WITH THE DOLBY DIGITAL AMP. If you connect the optical output to a Dolby digital AMP, you can listen to better sound.
User Manual BDH5031V 6. PICTURE 6.1 P.MODE SELECTING PICTURE MODE • Select the Picture mode that is appropriate depending on the kinds of pictures, you enjoy. 1. Selecting Picture Mode. • Press the “P.MODE” on the remote control. • While pressing the “P.MODE” for the first time, the current picture mode will be displayed. 2. Each Press of the Button Will Select One of Four Picture Modes. • Each time you press the button, a different picture mode appears.
User Manual BDH5031V 6.2 CUSTOMIZING PICTURE • You can adjust the colour tone and brightness to your preference. Mode Picture Sound Dynamic Brightness 40 Contrast 80 Sharpness 8 Colour Screen 1. Press the MENU Button. • The MENU shown below will display on the screen. 60 Colour Temp. Normal Noise Reduc. On Feature Input Move Select Mode Picture Sound MENU Exit Dynamic Brightness 40 Contrast 80 Sharpness 8 Colour Screen 2. Press the / button.
User Manual BDH5031V Mode Picture Sound User Brightness 40 Contrast 80 Sharpness MENU VOL VOL 8 Colour Screen 4. Select User Mode Adjustments. • While you are in [Picture Mode – User], press the “/” buttons to select a specific adjustment item. 60 Colour Temp. Normal Noise Reduc. On Feature Input Move Adjust Mode Picture Sound MENU Exit User Brightness 50 Contrast 50 Sharpness 8 Colour Screen 5. Picture Condition Adjustments.
User Manual BDH5031V 6.3 ADJUSTING SCREEN • You can adjust screen size or aspect ratio a desired. 6.3.1 Adjusting with PICTURE FMT button PICTURE FMT 1. Press the PICTURE FMT Button. • The current screen size will be displayed on the screen. • Each time you press the PICTURE FMT button on the remote control, a different screen size appears. The sequence used is as follows in case of AV1, AV2 and AV3 modes : Auto 16:9 4:3 LB(16:9) LBS(16:9) 14:9 LB(14:9) LBS(14:9) Auto • N.B.
User Manual BDH5031V 6.3.2 Adjusting Screen in the MENU • You can adjust the screen in the menu. • This function is same to the [PICTURE FMT] of remote controller. Mode Picture Sound Dynamic Brightness 40 Contrast 80 Sharpness 8 Colour Screen 1. Press the MENU Button. • The MENU screen as shown below will appear. 60 Colour Temp. Normal Noise Reduc. On Feature Input Move Select Mode Picture Sound Screen MENU Exit 16:9 H. position 91 V.
User Manual BDH5031V 6.4 WATCHING A STILL IMAGE • You can view still images with this function. However, displaying the same images such as still images for a long time may cause image burn. 1. Press the “STILL” button. • If you wish to freeze a picture, press the “STILL” button. You can still hear the sound. • Press “STILL” button again to cancel the “STILL” function. Still STILL Notes: 1) Displaying the same images such as still images for a long time may cause image burn (after-image lagging).
User Manual BDH5031V 6.5 P.MODE PICTURE FMT AV S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE SWAP WATCHING TWO PICTURES SIMULTANEOUSLY • PIP (Picture-in-Picture) and P-by-P (Picture-by-Picture) modes allow users to watch two pictures simultaneously. Screen Adjustment of the Sub-picture • Alpha Blend of the sub-picture can be adjusted on Screen Menu of OSD. • Alpha Blend is only available in PIP mode.
User Manual BDH5031V PIP SOURCE 4. Select the Input Source. • Various signal sources can be displayed within the sub-picture under PIP mode. • Once the PIP mode is on, you may change the input source of the subpicture by pressing the “SOURCE” button. • Pressing the “SOURCE” button repeatedly will cycle through following order: AV1 AV2 AV3 5. Available PIP Input Combinations. • Main-picture and sub-picture input combinations are listed below for reference.
User Manual BDH5031V 7. SOUND 7.1 SELECTING SOUND MODE • Enjoy various sound modes by selecting your favourite Sound Mode depending on the kinds of moving pictures. S.MODE 1. Select “SOUND MODE”. • Press the “S.MODE” on the remote control. • While pressing the “S.MODE” for the first time, the current sound mode will be displayed. 2. Every Press of the Button Changes Modes. • Each time you press the button, a different sound mode appears.
User Manual BDH5031V 7.2 CUSTOMIZING SOUND MODE • This feature allows the user to adjust for their preference. Mode Picture Sound Dynamic Brightness 40 Contrast 80 Sharpness 8 Colour Screen 1. Press the MENU Button. • The MENU screen as below will be displayed. 60 Colour Temp. Normal Noise Reduc. On Feature Input Move Select MENU Exit Balance Picture Sound 0 Effect Off AVL Off Mode 2. Press the “/” Button.
User Manual BDH5031V Balance Picture Sound 0 Effect Off AVL Off Mode Normal Equalizer Screen Feature Input Move Adjust MENU Picture Sound 0 Effect Off AVL Off Mode Normal 5. Select the Sound Mode. • Select the Sound Mode by pressing the “/” buttons, then adjust it by pressing the “/” buttons.
User Manual BDH5031V 8. INPUT SIGNAL 8.1 SELECTING INPUT SIGNAL • Used to select INPUT signal of external device connected to the PDP. 1. Press the Input Signal Selecting Button. • Press the “AV” button on the remote control, or select the desire input signal using Keypad of the PDP unit. • When you press the “AV” button, you will see the OSD as shown. You can move using “/” and select desire input mode with “/” button.
User Manual BDH5031V 8.2 CHECKING THE CURRENT INPUT SIGNAL • Press the [RECALL] button on the remote control, then displays basic informations of the current input signal, Under this state, pressing the [RECALL] button once more, additional informations about the current input signal will be displayed on the OSD. • Used to check the INPUT signal mode, current time, resolution, etc. Component PM 12:00 1. Press the “RECALL” Button. • Press the “RECALL” button on the Remote Control.
User Manual BDH5031V 9. OTHER FUNCTIONS 9.1 MENU BACKGROUND, LANGUAGE, KEYBOARD LOCK SETTING AND RC LOCK SETTING • Used to select the translucent level of MENU background and language used in MENU. Mode Picture Sound Dynamic Brightness 40 Contrast 80 Sharpness 8 Colour Screen 1. Press the MENU Button. • The MENU screen will be displayed as below. 60 Colour Temp. Normal Noise Reduc.
User Manual BDH5031V Background Picture Sound Screen Language 10 English Keyboard Lock Off RC Lock Off MGDI plus On Auto Power Off Time Setting Feature Notes: * When power is turned on the first time, ‘SELECT LANGUAGE’ mode will be displayed, then, select the desired language by using “” button. (Displayed only once) Anti Burn-In Mode Reset Input Operation hrs.
User Manual BDH5031V 9.2 MGDI PLUS (META GENUINE DIGITAL IMAGE) • MGDI Plus is the image enhancement technology of which provides more clear, realistic, and delicate images. • MGDI Plus function can not be used In PC and HDMI modes. Mode Picture Sound Dynamic Brightness 40 Contrast 80 Sharpness 8 Colour Screen 1. Press the MENU Button. • The MENU screen will be displayed as below. 60 Colour Temp. Normal Noise Reduc.
User Manual BDH5031V 9.3 AUTO POWER SETTING POWER/STANDBY Indicator Front panel LED lights • When the AC power is on : Green. • When the AC power is in the stand-by mode : Red. Background Picture Sound Screen Language 10 English Keyboard Lock Off RC Lock Off MGDI plus On Auto Power Off 1. Auto Power Setting. • Select the [Auto Power] by pressing the “/” button from [Feature]. • You can select [Auto Power] ON and OFF mode by using the “” button.
User Manual BDH5031V 9.4 Mode Picture Sound Dynamic Brightness 40 Contrast 80 Sharpness 1. Press the MENU Button. • The MENU screen will be displayed as below. 8 Colour Screen TIME SETTING 60 Colour Temp. Normal Noise Reduc. On Feature Input Move Select MENU Exit Background Picture Sound Screen Language 10 English Keyboard Lock Off RC Lock Off MGDI plus On Auto Power Off 2. Select Feature. • Select [Feature] by the “/” button.
User Manual BDH5031V • The “Current time” must be set up ahead of setting up other time memories. 4. Off-Time setting. MENU • Select Functions by pressing the “/” button. First, set [Clock]- current time, and then You can setup VOL off-time. • [Clock] : Adjust the desired hour and minute with “/" button. • [Off Time] Setting methods are same as [Clock] setting method. • [Off Timer] : Setting [On] and [Off ] of each Timer.
User Manual BDH5031V 9.5 ANTI BURN-IN • Displaying a still image for a long time causes part image sticking on the screen. • The Anti Burn-In function minimises this effect. Mode Picture Sound Dynamic Brightness 40 Contrast 80 Sharpness 8 Colour Screen 1. Press the MENU Button. • The MENU screen will be displayed as below. 60 Colour Temp. Normal Noise Reduc.
User Manual BDH5031V 4. Select Functions. • Every press of the “” button after select function by the “/” button would switch between ON/OFF. Anti Burn-In Picture Sound Pixel Shift Off Low Bright Off Image Invert Off Screen Feature Input Move Adjust PIXEL SHIFT MENU Exit Notes: * Pixel Shift : The whole screen shifts up/down, left/right at 25 sec interval to minimize image sticking.
User Manual BDH5031V Mode Picture Sound 9.6 Dynamic Brightness 40 Contrast 80 Sharpness • You can restore the values of the adjustment setting made in the MENU back to factory settings. 8 Colour Screen MODE RESET Colour Temp. Normal Noise Reduc. On 60 1. Press the MENU Button. • The MENU screen will be displayed as below. 10 2. Select Feature. • Select [Feature] by the “/” button.
User Manual BDH5031V 9.7 SETTING SLEEP TIMER • Sleep Timer turns the PDP off after a preset time. 1. Press the “TIMER” Button. TIMER • Press the “TIMER” button on the Remote Control. • Pressing the “TIMER” button first time will display the current setting for Sleep Timer. • To cancel the Sleep Timer, press the “TIMER” button to select ‘Off’.
User Manual BDH5031V 10. SPECIFICATIONS DISPLAY UNIT Diagonal Size Screen Aspect Ratio System Display Resolution Pixel Pitch Dimension 127cm(50”) 16 : 9 PAL B/G, ,D/K, I/I, SECAM B/G, D/K, L/L’ HD Panel: 1365(H) X 768(V) dots HD Panel: 0.81(H) X 0.81(V) mm 1240(W) X 753(H) X 100.5(D) mm (without Stand) 1240(W) X 817(H) X 370(D) mm (with Stand) Weight (without stand) Power Requirement 43.
