User manual

10 EN
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of this product.
1 Press TREBLE +/- or BASS +/- to change
the frequency.
» If the treble or bass is set to the
maximum or minimum, the white LED
on the speaker blinks twice.
2 To reset the bass and treble to the default
setting, press RESET .
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1 Press AUDIO SYNC +/- to synchronize
the audio with the video.
• AUDIO SYNC + increases the sound
delay, and AUDIO SYNC - decreases
the sound delay.
» If the value of sound delay is set to the
maximum or minimum, the white LED
on the speaker blinks twice.
MP3 player
Connect your MP3 player to play your audio
les or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on the left speaker.
2 Press AUDIO IN.
3 Press the buttons on the MP3 player to
select and play audio les or music.
• On the MP3 player, it is recommended
to set the volume in the range of 80%
maximum volume.
Play music via Bluetooth
Through Bluetooth, connect your product with
a Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio les stored on the
device through the speakers of this product.
What you need
• A Bluetooth device which supports
Bluetooth prole A2DP, and with Bluetooth
version as 3.0 (EDR).
• The operational range between the
main unit (left and right speakers) and
a Bluetooth device is approximately
10 meters (30 feet).
1 Press Bluetooth on the remote control
to switch this product to Bluetooth mode.
» The blue LED on the left speaker
blinks.
2 On the Bluetooth device, switch on
Bluetooth, search for and select Philips
BTS7000 to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
» During connection, the blue LED on
the left speaker blinks.
3 Wait until you hear a beep sound from this
product.
» The blue LED on the left speaker lights
up.
» If the connection fails, the blue LED on
the left speaker blinks continually.
4 Select and play audio les or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
• If music streaming is interrupted, place
the Bluetooth device closer to this
product.