Quick start guide CD181/CD186
Important safety instructions • • • • Use only the power supply listed in the technical data. Do not allow the product to come into contact with liquids. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. (Refer to the user manual online) Overview CD186 Adjust the speaker volume. • Play the previous message. • Replay the current message. Loudspeaker • Find handsets. • Register additional handsets. Turn the answering machine on/off.
In call In idle mode Enter the option menu menu REDIAL/C Enter the redial list Enter the redial list Increase the volume Enter the phonebook Decrease the Enter the call log volume Recall key* Make and receive *network dependent calls End calls Turn handset on/off (press and hold) Mute/unmute the microphone Turn the speaker Make and receive on/off calls MENU/OK Enter the option Speaker Earpiece Microphone In menu Confirm selection Cancel operation Scroll up Scroll down Exit menu/operation
It displays the connection between the handset and the base. The more the bars are shown, the better the connection is. Answering machine: it flashes when there is a new message. It remains steadily on when the telephone answering machine is turned on. It indicates a received call in the call log. If you are using a voice mailbox from your provider, this icon flashes when there is a new message. It remains steadily on when the voice messages are already viewed in the call log.
1 Connect Connect the base station Telephone socket Power socket 1 Connect each end of the power adapter to: Power socket Power adapter Telephone base station 2 1 3 Extra handset charger • the DC input jack at the bottom of the base station; • the power socket on the wall. 2 Connect each end of the line cord to: • the telephone socket at the bottom of the base station; • the telephone socket on the wall.
2 Get started Configure your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). After the welcome message, press MENU/OK. 3 Please set the country and language if prompted. 4 Set the date and time. • If the time is in 12-hour format, press / key to select [AM] or [PM].
Charge your phone Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear a docking sound. »» The handset starts charging. Note Charge the batteries for 8 hours before first use. Check the battery level Charge 8 hours When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars flash until charging completes.
3 Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press . Earpiece volume Press or to adjust the volume during a call. Phonebook Add record 1 Press MENU/OK, then select [PHONEBOOK] > [ADD NEW], then press MENU/OK to confirm. 2 Enter the name, then press MENU/OK to confirm. 3 Enter the number, then press MENU/OK to confirm.
Call log Redial list To make a call To make a call To view more details To save a call record to the phonebook 1 Press 2 Press and select a record. . 2 Press MENU/OK. 3 Select [VIEW]. To save a call record to the phonebook 2 3 4 5 6 7 Press MENU/OK. Select [Save number]. Press MENU/OK to confirm. Enter the name. Press MENU/OK to confirm. Press MENU/OK to save. To delete a call record 2 Press MENU/OK. 3 Select [Delete] or [Delete all]. 4 Press MENU/OK to confirm.
Register the handsets You can register additional handsets to the base station. The base station can register up to 4 handsets. 1 Press MENU/OK on the handset. 2 Select [SERVICES] > [Register], then press MENU/OK to confirm. 3 Press and hold on the base station for 5 seconds. 4 Enter the system PIN (0000). 5 Press MENU/OK to confirm the PIN. »» Registration is completed in less than 2 minutes. Restore default settings You can reset your phone settings to the original factory settings. 1 Press MENU/OK.
Frequently asked questions No signal bar displays on the screen. • The handset is out of range. Move it closer to the base station. • If the handset displays [Unregistered], put the handset on the base until the signal bar appears. If I fail to register the additional handsets to the base station, what do I do? Your base memory is full. Unregister the unused handsets and try again. No dialing tone • Check your phone connections. • The handset is out of range. Move it closer to the base station.
Welcome to Philips Register your product at www.philips.com/welcome Need help? User manual / Online help www.philips.com/support When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. © 2013 Koninklijke Philips Electronics N.V.
