INSTALLING duo 1 INSTALLING 2 Quattro & 3 1 3 & 2 4 5 PHILIPS 24 2,4 V PHILIPS PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V 2,4 V PHILIPS 2,4 V duo 2,4 V PHILIPS 6 7 8 10 9 PHILIPS 24 2,4 V PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V 2,4 V 2,4 V 5 4 24 11 12 13 15 14 PHILIPS 24 2,4 V PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V PHILIPS 2,4 V 2,4 V Quattro 16 duo 17 18 See last page Quattro 24 2,4 V PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V 2,4 V 20 19 PHILIPS
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 1 Installing your telephone ✦ Inserting / Replacing battery pack / Telephone connection Warning: To insert battery pack and /or to connect your telephone, please refer to the drawings printed on the inside cover. With the help of the installation drawings : 1.- Plug the line cord (A) into the line socket on your DECT 211 or DECT 215 base station. Plug the power cable (B) into the power socket on your DECT 211 or DECT 215 base station.
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 2 Environment & Safety ✦ Safety information : This equipment is not designed for making emergency calls when the power fails. An alternative should be made available for access to emergency calls. ✦ Power requirements : The product requires an electrical supply of 220-240 volts, single phase alternating current, excluding IT installations defined in standard EN 60-950.
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 3 DECT 211 & DECT 215 Handsets DECT 211 DECT 215 Keypad Talk key p5 Phonebook keys p6 Call log key p7 Redial list & correction key p5 Validation and intercom key p8 Loudspeaker key (DECT 211) p5 Loudspeaker/Answerphone key (DECT 215) p5 Programming and recall type key p 14 Volume key p5 www.philips.
DECT 215 master UK indice 1.
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 5 Using the telephone Making a call ✦ Answering a call / Hanging up answer the call. To end the conversation, press the key again or replace the handset on the base station. ✦ Calling directly dial the phone number. ✦ Predialling the number before calling flashes on an incoming call.or if the answerphone DECT 215 is on line. To correct entries use Dial the phone number ✦ Calling from a phonebook .
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 6 ✦ Storing one of the redial list numbers into one of your phonebooks or to scroll through the redial list or beep enter the name ✦ Number correction corrects : l a digit when predialling, l a digit or a character when entering names in the phonebooks. A long press on aborts any procedure in progress. Creating and changing phonebook entries The telephone has two phonebooks : A 20-entry family phonebook (see VIP feature p.
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 7 Using the call log This feature is available if you have registered to the caller identification service with your operator. The call log stores the last 10 external calls received : - answered calls - unanswered calls - Voicemail box service information* - messages from your answerphone (DECT 215 only) ( ). * Subject to a subscription with your operator.
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 8 Using the intercom This function can only be used with a multi-handset configuration. It allows you to make free internal calls and transfer external calls from one handset to another. ✦ Internal call short press to call all the handsets in idle mode. long press, enter the handset number (1 to 4) to call the selected handset in idle mode. * If the handset does not belong to the DECT 211 or DECT 215 range, this function may not be available.
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 9 Using your answerphone Setting up the answerphone The answerphone is by default activated with a pre-recorded message and the answer & record mode. Recording capacity : 9 min. (standard quality) - 6 min (high quality) : including personal outgoing message if recorded. ✦ Activating the answerphone icon is beep on. To exit ✦ Deactivating the answerphone icon is beep off. To exit ✦ Playing new messages / playing a memo icon blinks. .
DECT 215 master UK indice 1.qxd 23/03/04 14:44 ✦ Recording your personal outgoing message speak after the beep * To exit However, if you do so, you will permanently erase the pre-recorded outgoing message. ✦ Recording a memo If you want to leave a local message for your family : speak after the beep To exit ✦ Selecting the answerphone mode You can select either answering mode only (which plays an outgoing message but does not take messages) or answering & recording mode (which takes messages.
DECT 215 master UK indice 1.qxd 09/03/04 13:14 Page 11 Remote access This allows you to remotely dial in and access your answerphone via any telephone with a key and tone dialling. ✦ Remotely activating the answerphone Dial your phone number enter the RC Code* after 9 rings and a beep RC (Registration Code) code is written under to activate the base.
DECT 215 master UK indice 1.qxd 09/03/04 13:15 Page 12 Customising the telephone Programming the phone To enter the programming mode press . Icons representing the menus will then be displayed on the screen : Réglages répondeur (uniquement pour le DECT 215) Volume and melody settings (VIP melodies*) Handset registering Other settings Once the menu is selected with and keys, press to confirm your choice. Note : Each menu has one or several options.
DECT 215 master UK indice 1.qxd 09/03/04 13:15 Page 13 ✦ Changing Remote Access Code (option 4/5) To remotely access your answerphone you need to enter a secret code (4 digits). By default, this code is identical to the RC code written under the base. If you want to change the default code : Enter a personal code and press to validate. Note : You can delete with your Remote Access Code. If this code has been deleted, the remote-activation of the answerphone is not possible.
DECT 215 master UK indice 1.qxd 09/03/04 13:15 Handsets registering / unregistering ( Page 14 ) 4 handsets can be registered to the base station. A handset can only be associated with 1 base station. ✦ To register another handset First enter registration mode by unplugging and plugging back in the power adapter to the electricity supply. Once the menu is selected, enter the RC* code written under the base and press to confirm.
DECT 215 master UK indice 1.qxd 09/03/04 13:15 Page 15 ✦ Changing recall type (flash setting) The use of some services accessed with (call waiting, call forward...) will depend on the flash setting (Short/Long) according to your installation type (Public, PABX). (country dependent) : Short . : Long. to choose between Short or Long or Troubleshooting ✦ Telephone troubleshooting..... l Please read this user guide carefully before calling your Philips Customer Care Center.
DECT 215 master UK indice 1.qxd 09/03/04 13:15 Page 16 ✦ Answerphone troubleshooting..... PROBLEMS CAUSES SOLUTIONS - Answerphone icon is blinking on the display. The answerphone memory is full Consult and delete messages to free sufficient memory. (p 9) - The answerphone has not recorded your outgoing message. The answerphone memory is full. Consult and delete messages to free sufficient memory. (p 9) - The answerphone has stopped. The answerphone memory is full.
INSTALLING duo 1 INSTALLING 2 Quattro & 3 1 3 & 2 4 5 PHILIPS 24 2,4 V PHILIPS PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V 2,4 V PHILIPS 2,4 V duo 2,4 V PHILIPS 6 7 8 10 9 PHILIPS 24 2,4 V PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V 2,4 V 2,4 V 5 4 24 11 12 13 15 14 PHILIPS 24 2,4 V PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V PHILIPS 2,4 V 2,4 V Quattro 16 duo 17 18 See last page Quattro 24 2,4 V PHILIPS PHILIPS PHILIPS 2,4 V 2,4 V 2,4 V 20 19 PHILIPS