User manual GB IRL 3111 285 21872 Charge the handset(s) 24 hours before use.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 1 Quick start guide The pilot key allows you to browse the menus. Up right in the menus & options. Press to go left in the menus and down to go to select a menu or an option and validate a setting.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 2 DECT 511/DECT 515 Handset Pilot key Press to enter the carousel or select a menu or an option Scroll to move through the menus & options Move the cursor left/right Scroll up to access the Call Log from idle mode Scroll down to access the Phonebook from idle mode A long press to unlock the keypad Talk - Press to take the line, answer a call or hang up.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 1 Icons on the handset display The display gives information about the operation of your telephone On first use, it is sometimes necessary to wait for a few minutes of charge before seeing icons on the display. When charging, the battery bars scroll from empty to full status. When the handset discharges, the battery shows the status : and empty . Full , 2/3 , 1/3 The answer machine is activated (DECT 515).
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 2 base station Paging key The paging key enables you to locate a missing handset. Press the key until the handset starts to ring. Once retrieved, press any key on the handset to end paging. base station Loudspeaker New message indicator When blinking, it indicates that there is a new message. Paging key Press to locate all handsets When fast blinking, it indicates that the answer machine memory is full.
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 5 Menu structure By using the “Pilot key” SMS on the side of the handset, you can scroll through the menus.
DECT511_GBIE_part1_indice2_internet.qxd Answer machine Saved messages 26/10/2004 14:00 Page 6 Play Next Previous Call Delete Store Send SMS Record a memo Outgoing messages Answ. machine mode Answer and record with personalised OGM Answer only with personalised OGM Answer and record with predefined OGM Answer only with predefined OGM Record outgg msg Standard OGM for answ.
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.qxd Base station 26/10/2004 14:00 Page 9 Enable registration Line settings Dial mode Tone / Pulse Recall type Short flash / Long flash Choose country/oper. First ring On or Off Service code settings 11 Menu structure http://www.philips.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 10 Conformity,Environment and Safety Safety information This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. Conformity Hereby, Philips declares that the DECT 511xx and DECT 515xx are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 11 Declaration of conformity We Philips Consumer Electronics Route d’Angers 72081 Le Mans Cedex 9 France Declare that the products DECT 511xx and DECT 515xx are in compliance with the Annex III of the R&TTE-Directive 1999/5/EC and then with the following essential requirements: Article 3.1.a (protection of the health & the safety of the user) : EN 60950-1 (10/2001) Article 3.1.
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:01 Page 13 Installing the base station Situate your product close enough to the telephone and mains power sockets so that the cables will reach.To properly install the base station, plug the line cord and the power cable into the base station. Plug the cord and the cable into the wall. A beep indicates that the phone is properly installed (only available for DECT 515).
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:01 Page 14 Introduction Philips screen saver After 2 minutes of inactivity, the screen saver is displayed: You can deactivate it (see p.30) Idle mode In idle mode, the DECT 511/515 display shows various information: - The date & time, the name of the handset and the instructions to access the menu. - Missed calls , new SMS or new messages or network voicemailbox message - “Do Not Disturb” mode (answer machine) , if any.
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:02 Page 16 In call features During an external call, some other options are available. Press to enter Options.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:02 Page 17 Editing systems Case mode By default, the first letter of a sentence is in upper case. Use to change the case mode: - all letters in upper case (AB) - all letters in lower case (ab) or - the first letter in upper case and the rest of the word in lower case (Ab). Punctuation and mathematical marks are available through characters are also available on and while other special (see table page 20). Scroll to move the cursor left or right.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:02 Page 18 Let’s compare Multitap and Eatoni® systems to write “Peter”. Keypad Keys Multi-tap Sequence [space] 1 @ _ # = < > ( ) & ¤ £ $ ¥ [ ] { } ¤ § To write “Peter” with multi-tap 1 abc2àäçåæ 2 Press once : P def3èé ) N 3 ghi4ìΓ 4 Press twice : Pe jkl57 5 mno6ñòö Press once : Pet 6 pqrs7ß A 2 E 7 Press twice : Pete tuv8ùü 8 wxyz9 f S Ξ Q 9 Press three times : Peter .
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:02 Page 19 SMS menu is also accessible via the carousel or Important information are also available on the SMS leaflet in the box SMS Send new SMS Read SMS SMS settings SMS stands for Short Message Service.To benefit from this service you must subscribe to the Caller Line Identification Service (CLI) together with the SMS service from your network provider.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:02 Page 20 Read SMS The SMS list contains the stored and received SMS. The received SMS are shown by and the stored SMS are shown . To read an SMS/to view the number Press to directly reach Send new SMS Scroll to Read SMS and select Select your SMS box* (only if you have created several SMS boxes).
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:03 Page 21 To reply to an SMS Press to directly reach Send new SMS Scroll to Read SMS and select Select your SMS box* (only if you have created several SMS boxes).
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:03 Page 22 To send again Press to directly reach Send new SMS Scroll to Read SMS and select Select your SMS box* (only if you have created several SMS boxes).
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:03 Page 23 To call from the SMS list Press to directly reach Send new SMS Scroll to Read SMS and select Select your SMS box* (only if you have created several SMS boxes).
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:03 Page 25 To set the SMS centre number(s) The SMS are sent through a centre.To receive an SMS from another operator, you must set the corresponding numbers.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:03 Page 26 Handset Babysit mode Registration Rename handset Date & time Display contrast Backlight Screen saver Babysit mode if there are at least 2 handsets This feature allows you to monitor the baby’s room. Place the handset in the room to be monitored and you will hear the noise coming from the room on the additional handset.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:03 Page 27 To select a base station Each DECT 511/515 handset can be used with up to 4 base stations. To use a handset with another base station, the handset must be first registered to that base station.
DECT511_GBIE_part1_indice2_internet.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:04 Page 29 Answer machine Saved messages Record a memo Outgoing messages Answerphone settings The DECT 515 includes an answer machine that records the calls when it is activated.You can reach the answer machine from the base station or the handset. By default, the answer machine is activated. It can store up to 25 messages within the maximum recording time of 30 minutes. A message can be up to 3 minutes long.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:04 Page 30 To play and browse through saved message(s) via the handset Press to enter the carousel menu Scroll to Answer machine and select Select Saved messages, the message which was recorded first is automatically played Press to access the Options Press to select Play To go to next or previous messages, scroll to Next message or Previous message and select Note: you can listen to the message(s) via the Call log.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:04 Page 31 Settings To select the answer mode and the outgoing message (OGM) type You can select among 2 answer modes :Answer only (when no messages can be left) and Answer & record (when messages can be left). For each mode, 2 outgoing message types are available: predefined or personal message. By default the answer machine is set to Answer & Record with predefined OGM.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:04 Page 32 The message is automatically played back.You can delete and/or record it again.The personal message can be up to 1 minute long Note: Select Standard OGM for answer only mode or Standard OGM for Answ. & Record mode if you have no CLI subscription.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:39 Page 1 To set the call screening This feature allows you to activate or deactivate the base station loudspeaker so that you can choose whether to hear or not the callers leaving a message. You can set permanent call screening on the base station.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:40 Page 2 To remotely control your answer machine To remotely access your answer machine : - from another phone dial home - if your answer machine is on, during or after the message press the star key on the handset ; if your answer machine is off, you will hear a beep after 45 seconds, then press the star - dial your remote control code (the default code is the registration code RC) - if you have new messages they will be automatically played.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:40 Page 3 Record and listen to a memo This feature allows you to leave local messages for your family on the answer machine. A memo is recorded from the handset, it is represented by in the call log and can last up to 3 minutes.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:40 Page 4 Intercom Call all Handset list Intercom menu is accessible via the carousel or Using the Intercom (if there are at least 2 handsets) This feature allows you to make free internal calls, transfer external calls from one handset to another, use the conference option and the babysit feature (room monitoring).
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:40 Page 5 The called handset rings.The external call is put on hold. If there is no answer from the called handset you can resume the call on the first handset. Take the line on the called handset, both internal callers can talk Press to select Transfer (with handset 1) Scroll to Switch and come back to the external caller Note: to answer the call on the second handset you can press .
DECT511_GBIE_part2_indice2_internet.qxd Phonebook Add new View 26/10/2004 14:40 Page 6 Phonebook menu is accessible via the carousel or 65 names and numbers can be stored in the phonebook. The phonebook contains all the information related to the callers, especially the group settings.The names and numbers are shared with all the handsets registered to your base. Group settings There are 3 groups (group A, group B and group C).When ringing, the ring tone helps you identify the caller’s group (see p.
DECT511_GBIE_part2_indice2_internet.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:40 Page 8 To define a group for a name and number (see Group settings p.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:40 Page 9 Call log View Delete all Call log settings Call log menu is accessible via the carousel or The call log can store up to 40 entries : unanswered calls : memo or recorded conversation* : messages* sends : outgoing calls : answered calls : messages (operator voice mail/if operator the information) * DECT 515 only The call log shows the list of incoming calls.
DECT511_GBIE_part2_indice2_internet.
DECT511_GBIE_part2_indice2_internet.qxd Enter the text and press 26/10/2004 14:41 Page 11 OK (see page 19) Press to select Send now Note: once in the list of names, press to directly edit an SMS Delete all To delete all the call log Press to enter the carousel menu Scroll to Call log and select Scroll to Delete all and select Press to confirm OK Note: entries with unread messages will also be deleted (DECT 515 only).
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:41 Page 12 Operator services This feature allows you to activate or deactivate operator services that are subscription dependent. You need to set up codes (see page 56). Contact your network operator for more details.You can usually subscribe to Call forward, operator voice mailbox etc... Example of service: Call forward Calls can be redirected to another phone number. Set the code (see page 56) and activate it when necessary.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:41 Page 13 Extra Call duration Alarm clock Do Not Disturb mode Call duration Press to enter the carousel menu Scroll to Extra and select Press to select Call duration The total communication time is displayed Press to Reset the counter Alarm clock To set the alarm clock Press to enter the carousel menu Scroll to Extra and select Scroll to Alarm clock and select Scroll to Set day and select . Choose a day.
DECT511_GBIE_part2_indice2_internet.
DECT511_GBIE_part2_indice2_internet.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:41 Page 16 Group ring tones To set the group ring tones There are 3 groups of callers (see p 40 Group settings).You can associate 1 ring tone to a group.
DECT511_GBIE_part2_indice2_internet.qxd My ring tones 26/10/2004 14:42 Page 17 only available in the UK This menu gives access to all available downloaded ring tones.These ring tones can be set on your handset or on your base station (only available for DECT 515 base station) (see page 22).You can store up to 3 downloaded ring tones.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:42 Page 18 Scroll to Record new and select Press to start recording To delete a recorded melody Press to enter the carousel Scroll to Sounds and select Scroll to Record pers. melody and select Scroll to Delele and select Press OK to confirm Settings To set the base loudspeaker volume only available for DECT 515 Press to enter the carousel Scroll to Sounds and select Scroll to Settings and select Press to select Base loudspeaker vol.
DECT511_GBIE_part2_indice2_internet.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:42 Page 20 Base station Enable registration Line settings Service code settings Enable registration This feature allows you to register a DECT peripheral without keypad. Some DECT peripherals, such as repeaters, do not have any keypad. A special menu-operated procedure is used to register such peripherals to the base station.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:42 Page 21 To change the recall type Press to enter the carousel menu Scroll to Base station and select Scroll to Line settings and select Scroll to Recall type and select Press to select Short flash or scroll to Long flash and select Note: this setting is useful when using operator services.The use of some services accessed with +1, +2 and +3 (call waiting, call forward...
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:42 Page 22 Service code settings When you subscribe to extra services with your operator you may need to set some codes in your phone.The default codes are the codes used by the main national operator. If you subscribed to another operator you may need to change the codes. Contact your network operator for more information on the services.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:42 Page 23 FAQ 1/ I have no dialling tone after having installed my phone. How do I solve this problem? Check that you have connected your phone using the supplied line cable and not the one from any previous phone (they are often wired differently). Check that you have fully charged the handset according to the instructions given for the phone. Check that the aerial icon (radio link with the base station) is displayed.
DECT511_GBIE_part2_indice2_internet.qxd 26/10/2004 14:42 Page 24 8/ What is CNIP (Caller Name Identification)? As with the CLI service this new feature is dependent on the Network and it has to be activated by your Operator (by subscription). It will allow you to have the name of the caller displayed upon an incoming call. This service may not be available from all Operators yet.We advise you to check with your Operator. NB.
DECT511_GBIE_part2_indice2_internet.qxd Troubleshooting 26/10/2004 14:42 Page 25 www.philips.
DECT511_GBIE_part2_indice2_internet.
DECT511_GBIE_part2_indice2_internet.
User manual GB IRL 3111 285 21872 Charge the handset(s) 24 hours before use.
Feuillet SMS UK_05_07_04_index2.qxd 13/07/04 11:45 Page 1 INFORMATION ON TEXT MESSAGING (SMS) IN EIRE You must first subscribe to your network provider’s Caller Display service. Example : call EIRCOM free 1901. WARNING ! Change the operator type in your phone : Go to Base station menu and select Line Settings sub menu. Select the Choose country/oper. sub menu and choose the appropriate setting among the list (for example: Eircom). Please refer to your phone user manual.
Feuillet SMS UK_05_07_04_index2.qxd 13/07/04 11:45 Page 2 INFORMATION ON TEXT MESSAGING (SMS) IN THE UK You must first subscribe to your network provider’s Caller Display service. Registration to the SMS service is done by sending your first SMS. There is a charge for sending SMS text messages (Contact your network operator for more information). By default, your phone is set with the SMS centre 1 (British Telecom). If you change this setting, the SMS service may not work.
Feuillet 123 multimedia UK_ind4.qxd 19/01/2005 17:09 Page 1 The download of ring tones and outgoing messages (only available in the UK and depending on the network technical availability) To personalise your cordless telephone, there is nothing better than a melody and a message of your choice! Simply call 0906 666 0788 and that's it! The download of ring tones First of all you must subscribe to the SMS function with your network provider (see SMS leaflet).