DVD/CD PLAYER DIGITAL A/V SURROUND RECEIVER DVD SURROUND SURROUND RECEIVER RECEIVER 1050D MX-1060D MX- 1
Important Note Important notes for users in the U.K. 1 Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. 3 or BSI approved type. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp.
English Index Français English -------------------------------------------------------- 5 Español Français ------------------------------------------------------ 30 Deutsch Español ------------------------------------------------------ 56 Nederlands Deutsch ----------------------------------------------------- 82 Italiano Nederlands ----------------------------------------------- 108 Svenska Italiano ----------------------------------------------------- 134 Dansk Svenska ---------------------
General Information DK Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten.
Introduction DVD/CD Operation Package contents ....................................................... 6 DVD discs ................................................................... 6 Player Zones ............................................................... 6 General Information ................................................. 6 Environmental Information ...................................... 6 Installation ................................................................... 6 Cleaning Discs .........
Introduction English Package contents Player Zones This DVD/CD player-AV Surround Receiver is supplied with the following items : – a remote control with two AAA batteries – an AM loop antenna and an FM wire antenna – an audio and video cable for connection with your TV – a scar t cable – five speakers and including five speaker cables – an active subwoofer, including a connection cable and a power cable – this instruction booklet There are six world zones for the distribution of DVD Discs.
English Functional Overview Front Panel 1 2 34 5 7 8 9 0! 6 @ DVD /CD PLAYER- DIGITAL AV SURROUND RECEIVER PRESETS FREQUENCY▲ SURR. MODE FREQUENCY VOLUME SOURCE SELECT DIGITAL CINEMA CENTER CDR ▲ POWER /STANDBY TV DVD VCR OPEN / CLOSE * TUNER PREV & NEXT ^ PLAY 1 POWER / STANDBY y # STOP Ç (DVD/CD mode only) – $ PAUSE Å (DVD/CD mode only) – – to freeze the picture and sound. 3 SURR.
English 7 SYSTEM MENU Remote Control – – § ∞ 1 2 3 4 5 6 7 8 9 0 ! 9 @ # DISPLAY VCR 1 OPEN/CLOSE 2 MUTE ≤ 3 TV 4 5 6 CDR 7 8 9 TITLE SLEEP 0 TUNER SYSTEM DISC MENU MENU EXIT DVD TONE MODE VOL RDS FM MODE SEARCH £ ™ ¡ ) ( * & ^ 0 RDS DISPLAY % $ 8 – 9 – – – – – 0 – – – ! – – – @ – – # – $ – – % – – Notes for remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (DVD or TUNER, for example)
English Connections Rear Panel 1 0 9 8 2 7 IMPORTANT! – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – Never make or change any connections with the power switched on. – The type plate is located at the rear of the system. 1 ANTENNA FM Antenna For FM reception, connect the FM antenna to the FM terminal. Move the antenna in various directions until the clearest signal is received.
English 7 AUDIO OUT 0 SUBWOOFER OUT For connecting analogue (Left/Right) audio signals to external recording devices such as VCR or Tape Recorder for recording. Connect this terminal to the AUDIO INPUT terminal of the powered subwoofer. 8 FRONT SPEAKERS Connect the left front speaker to the “L” terminals, the right front speaker to the “R” terminals and centre speaker to the “C” terminals. Connect the coloured (marked) wire to "+" and the black (unmarked) wire to "-".
English Video Connections Digital/Optical Audio Connections Recording from the digital output The digital output can be used to record digitally a multichannel surround sound audio signal (Dolby Digital or DTS) to a CD-R.
System Setup English Positioning the centre speaker Setting up the Digital Cinema system The centre speaker should be placed in the centre between both front speakers and should always be placed in line with the television (e.g. underneath or on top of the TV). The best height for the centre speaker is the height of the listener’s ears (while seated). You must connect all the speakers and set up the system properly in order to enjoy the Digital Cinema experience at home.
1 Press SYSTEM MENU to enter System Setup mode. 2 Press £ to select Speaker Setup. 3 Press ( / ) until Speaker Distance Setup is selected. English Setting the speaker distance Subwoofer Setup Before you operate the subwoofer, complete the subwoofer connections. Switch on your player and select the sound source. Switch on/off the subwoofer 1 To activate the subwoofer, set the on/off switch at the 4 Press £ to enter Speaker Distance Setup mode. 5 Use ( / ) to select a different speaker.
Basic Functions English Selecting the source ● Press one of the SOURCE SELECT buttons (VCR, TV, CDR, TUNER or DVD) to select the input source. ➜ The selected source will be displayed. Adjusting the master volume The master volume adjusts all speaker channels at the same time. ● Rotate the VOLUME knob on the front panel (or press VOL +/- on the remote control). Selecting output modes surround sound & sound effects The number of output modes varies according to the system setup and the input source.
English Soundfield Effects The digital Soundfield Effects can recreate the effects of sounds reflected from walls or ceilings to obtain the sound presence of real environments. STADIUM This mode recreates a large stadium effect using very long reverberation times. STAGE This effect recreates a stage environment, emphasizing sound from the front speakers. HALL The surround effect recreates a hall using lots of reflections. Suitable for orchestral music such as classical and opera.
Tuner English Manual tuning 1 Press TUNER to select tuner mode. ➜ After 2 seconds, the display will show the current waveband and frequency. 4 Press ( / ) (or numeric keys 0-9 on the remote control) 5 to select the desired preset channel number to store. Press PRESETS again to store the radio station. ● Repeat steps 2–5 to store other preset radio stations. Selecting Preset Radio Stations 1 In tuner mode, press TUNER to switch between FM and 2 To switch between FM and MW waveband, press TUNER again.
English Searching for RDS radio stations using Programme Type The following programme types exist and can be received by your Radio Tuner : NEWS, AFFAIRS, INFO, SPORTS, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M, ROCK M, MOR M, LIGHT M, CLASSICS, OTHERS M, etc.. 1 To automatically search for an RDS programme type, first 2 select FM radio mode. Press the RDS SEARCH repeatedly until the required programme type appears on the display. 3 Press and hold FREQUENCY 4 or 3 until auto-search is activated.
Clock/Timer English IMPORTANT! When in DVD/CD mode, it is not possible to operate clock or timer function. Setting the Clock 1 Press SYSTEM MENU to enter System Setup mode. 2 Press ( / ) to select the Clock Setup mode and press 7 Press £ to confirm and return to the last selected source. ● Repeat steps 1-5 again to set the Off Time. £ to confirm. Note: – When the “on time” is reached, the player will switch on to the last selected source. 3 Press à / á to change between 12 and 24 hour mode.
Stop/Resume Stop Loading Discs 1 Press OPEN/CLOSE 0 to open the disc tray. 2 Load your chosen disc in the tray, label side up. 3 Press OPEN/CLOSE 0 again to close the tray. ➜ There will be a short delay while the player identifies the disc and reads the menu from the disc. ● Some discs will start playing automatically, others will display the Disc Contents Menu. If the menu is presented, use à / á or ( / ) to select a play option, then press £ to confirm the selection.
English Language/Sound There could be alternative language tracks or 2 channel and 5.1 channel audio available on a disc. All discs are different in this respect. ● Press à or á to cycle through the sound tracks available on the disc, then press £ to confirm. Playing a music CD 1 Load a music CD in the disc tray. 2 Press £ to start playback. ● You can use the numeric keys on the remote control to directly select a desired track, then press £ to confirm.
A number of operations can be done with the Active Navigation Menu without interrupting disc playback. English Active Navigation Menu (music CD) Random All the tracks will play in random order. ● Press £ repeatedly to select random “ON” or “OFF”. OSD (on screen display) 1 Press DISC MENU. 2 3 ➜ The Active Navigation Menu will be displayed across the top of the TV screen. Press ( or ) to move through the Active Navigation Menu. Press DISC MENU or EXIT to exit.
English On-screen messages During play, various messages will be shown on the screen for a few seconds to confirm that a function has been selected. You can switch on or off these messages in the “On Screen” setup mode of the System Setup menu. The possible messages may appear are listed below : PLEASE WAIT .................... The system is initialising. READING ............................ Reading the disc. OPEN ( é ) ...................... The tray is about to open. CLOSE ( ) ......................
The selections from the Disc Setup Menu are the preferred options that will be chosen if they are available on a disc. If the disc inserted does not have the preferred option, then the disc’s own preference will be used. IMPORTANT! To access the Disc Setup Menu, playback must be stopped. Language 2 3 ➜ The Disc Setup Menu will be displayed across the top of the TV screen. Press à / á or ( / ) to move through the Disc Setup Menu. Press £ to confirm the selection.
English TV Aspect [L-Box] means "Letter Box". The picture will be displayed as with black bars at the top and bottom of the screen. (For disc which support letter box feature) [P-Scan] means "Pan and Scan". The picture fills the whole screen however some parts to left and right may not be visible. The picture will automatically Pan and Scan to left and right to centre the most important part of the picture.
English Audio Set Example shows setting of 2 audio channel to 5.1 audio channel (only available on 5.1 Channel models).
English Digital Out Set up the Digital Audio output for a 5.1 Receiver/Decoder. This menu enables you to set the type of 5.1 output according to your Decoder/Amplifier. The form of each type of Data (Dolby Digital, MPEG or DTS) can be set as a Bitstream or PCM format to suit your Dolby & DTS decoders. [ Digital out ] The player is delivered without a password. When you set the parental level for the first time, you are invited to enter your own password (e.g. 1, 2, 3, 4).
English Panel Keys Lock A second method of parental control is also available in the PANEL KEYS option. Set panel keys to OFF and the player can only be operated by the remote control. X 3 [ Panel keys ] [ Parental ] [ Off ] [ Exit ] On Screen If the On Screen Display is on, various icons and messages will show on the screen for a few seconds to confirm that a function has been selected. Example showing how to turn off the On Screen Display.
English Programme music CD 3 Press à / á to select a desired track. 4 Press ) to store the track in the programme. To display the CD programme menu, the player must be in CD mode and playback must be stopped. ● Repeat steps 3–4 to store other tracks. 5 Press £ to save the programme. 1 Insert a music CD and close the disc tray. 2 ➜ The player will go into CD mode when it identifies the disc. Press RDS DISPLAY. ➜ CD Programme Menu will appear.
AMPLIFIER SECTION Power Output - Output power, stereo mode (DIN) ................................................... 2 x 70 W - Output power, surround mode (1 kHz) ................ 70 W RMS / channel Total Harmonic Distortion .............................. 0.7% at rated power (1 kHz) Frequency Response ..................................................... 20 Hz – 20 kHz / ±1 dB Signal-to-Noise Ratio ....................................................................... > 65dB (CCIR) Input Sensitivity .....
