Software Upgrade

ManualsBrandsPhilips ManualsDVD VCR ComboDVDR3430V/05B

Table Of Contents

Philips V&MA

DVDR3430V_EU Firmware Upgrade

Firmware Upgrade

We have developed a firmware upgrade to improve your product.

This upgrade is applicable for the following models:

DVDR3430V/05, DVDR3430V/31, DVDR3430V/51 and DVDR3430V/58.

Note: Before you proceed to upgrade, please be reminded that you need to do configuration again

each time after firmware upgrade!

Upgrade Procedure

Ste

Check your current version

First check your current firmware version to see if you need to upgrade:

1. When TV shows Philips wallpaper, close disc tray with no disc.

2. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control.

Note: In case the firmware version does not appear on the screen, eject and close the disc tray to reset, and

repeat step 2.

3. The software version will be displayed on the TV screen as

"DVDR3430V_EU_Vxx_xx, Drive: 45.04.xx.xx",or

“DVDR3430V_EU_Vxx_xx, Drive: 61.06.xx.xx".

4. Compare the version shown on screen with this firmware upgrade version,

“DVDR3430V_EU_V09_11, Drive: 45.04.05.10”or

“DVDR3430V_EU_V09_11, Drive: 61.06.01.10”.

5. If the current software version number is lower than the above, proceed to step 2.

6. Otherwise, you do not need to upgrade.

Ste

Download Firmware upgrade

Click the link to download the new firmware package on your computer. The package is compressed into a

single ZIP archive: DVDR3430V_EU_V09_11.zip.

Ste

Burning the firmware on CD-R / CD-RW

1. Extract the firmware upgrade files from the ZIP archive:

Tip: For more

information on burning

software we refer to

two popular burning

software programs

www.nero.com

www.easycdcreator.com

DVDR3430V_EU_V09_11.CUB

PHILIPS_45040510.BIN

PHILIPS_61060110.BIN

(Do not rename the filenames)

2. Burn ALL the extracted files: “.CUB” and “.BIN” files (not the ZIP file) onto a blank

CD-R or CD-RW disc, using the following settings:

- File System: ISO 9660 + Joliet

- File name length : max11 chars = 8+3 (Level 1)

- Mode : 2/XA

- Character set : ISO 9660 (ISO norme CD-ROM)

- No multi session

- Write Speed : Low

3. Finalize the disc. (The application may do this automatically.)

Summary of content (2 pages)

PAGE 1
Philips V&MA DVDR3430V_EU Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: DVDR3430V/05, DVDR3430V/31, DVDR3430V/51 and DVDR3430V/58. Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade! Upgrade Procedure Step 1 Check your current version First check your current firmware version to see if you need to upgrade: 1.
PAGE 2
Philips V&MA Step 4 Upgrading the firmware of your recorder Power up the recorder and eject the disc tray. Place the upgrade disc on the disc tray and close the tray. If the disc is recognized as an upgrade disc, the local display of recorder will show "SW UPGD". The TV screen will show a dialog box titled “Disc Upgrade” 4. Note: The recorder will indicate “Unknown Disc” in the following 2 situations.