User manual

English
14
VIDEO OUT
Pb
PrY
COMPONENT VIDEO OUT
AUDI
O
DIGITAL
OUT
COAXIAL
TV
TV OUT
VIDEO OUT
Pb
PrY
COMPONENT VIDEO OUT
AUDIO OUT
DIGITAL
OUT
COAXIAL
1
2
Video
Audio
Basic Connections (continued)
Option 3: Using Component Video
sockets (Y Pb Pr)
You can connect this unit to a TV
through the component video cables
which provides superior picture quality.
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required.
A Connect the component video cables
(red/blue/green - not supplied) from the
Y Pb Pr sockets on this unit to the
corresponding component video input
sockets (or labelled as Y Pb/Cb Pr/Cr or
YUV) on your TV.
B Connect the audio/video cable (not
supplied) from the AUDIO OUT L/R
sockets on this unit to the audio input
sockets (red/white) on your TV. Leave
the yellow video cable disconnected.
C Proceed to ‘Getting Started - Setting up
Progressive Scan feature’ for detailed
progressive feature setup.
Step 2: Connecting the
power cord
After everything is connected
properly, plug the AC power cord
into the power outlet.
Never make or change any connections
with the power turned on.
Helpful Hint:
– Refer to the type plate at the rear or
bottom of the product for identi cation and
supply ratings.
1dvp3260_3264_eu_eng1.indd 141dvp3260_3264_eu_eng1.indd 14 2008-03-10 4:37:39 PM2008-03-10 4:37:39 PM