User Manual

ManualsBrandsPhilips ManualsVideoDVP3980-37

Table Of Contents

1 Introduction

The upgrade version of this software is Version V24

This software can be used to upgrade the following Philips DVD Players:

• DVP3980/37

After you have completed the upgrade procedure, your DVD player will typically

perform better. What improvements are made depends on the upgrade software

you are using as well as the software that your DVD player contained before the

upgrade.

2 Key Features

This software version includes:

• Fix rare muting occurrence during playback

3 Preparations

You will need the following items:

• Personal Computer

• CD-R/RW drive and writing application software

• 1x blank CD-R

4 Software Version Verification Procedure

It’s important to write down the Software Version information of your DVD player

before you start the upgrade procedure. This information is also useful in case

you need to call Philips Customer Care Center.

1. POWER ON the set

2. Press SYSTEM MENU key to enter SETUP menu

3. Press < or > to navigate to GENERAL menu

4. Press keys 1,3,7,9 successively

5 Download Software

1. Click the link to download Firmware upgrade to your PC.

2. Unzip the .zip file

i) Do not rename the filename

ii) Visit

http://www.winzip.com/ for downloads if you cannot open the

.zip file.

6 Burning upgrade software on CD-R or CD-RW

1. Extract the files by unzipping the zipped file.

1 of 4

Summary of content (4 pages)

PAGE 1
Introduction The upgrade version of this software is Version V24 This software can be used to upgrade the following Philips DVD Players: • DVP3980/37 After you have completed the upgrade procedure, your DVD player will typically perform better. What improvements are made depends on the upgrade software you are using as well as the software that your DVD player contained before the upgrade.
PAGE 2
Philips Electronics Singapore Software Upgrade Instruction 2. Write the extracted files – not the zip file - onto a blank CD-R or CD-RW disc, using the following settings: Tip: For more information on • File System CD-ROM Joliet burning software we suggest you can refer to two popular • File name length: max 31 chars (ISO Level 2) burning software programs • Mode: 2/XA www.nero.com • Character set ISO 9660 www.easycdcreator.com • Single session • Write speed: low 3. Finalize the disc.
PAGE 3
Philips Electronics Singapore Software Upgrade Instruction Using Easy CD Creator 1. Insert a blank CD-R or CD-RW disc 2. Open Easy CD Creator 3. Select the unzipped files from the browser on top. 4. Click “Add” to copy the files below. 5. Select “Record CD” in the ‘File’ menu. 6. Click “Start Recording”, the firmware upgrade will now be burned onto the disc. 7 Steps to Upgrade Software 1. Power on the set and put in the disc. 2.
PAGE 4
Philips Electronics Singapore Software Upgrade Instruction 9. Caution: Do not unplug or power off the set while upgrading in progress. 8 After the upgrade Do check the change in the Software Version to confirm the upgrade. Please follow the procedure described in the Section 4.