Owner's manual


1 Press the dust compartment release button (1) and remove the
dust compartment from the appliance (2) (Fig. 15).
2 Pull the lter unit out of the dust compartment (Fig. 16).
3 To detach the outer lter from the inner lter, turn the lter outer
lter anticlockwise (1) and pull it off the inner lter (2) (Fig. 20).
4 Clean the inner lter and the outer lter with a brush. If the lters
are very dirty, clean them with a normal vacuum cleaner (Fig. 21).
5 Put the outer lter back onto the inner lter (1) and turn the
outer lter clockwise to lock it (2) (Fig. 22).
6 Place the lter unit back into the dust compartment (Fig. 18).
7 To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment. Then push the top of the dust
compartment towards the appliance until it locks into place
(‘click’) (Fig. 19).

1 Wind the cord round the body of the appliance (Fig. 23).
2 Fix the cord with the cord clip.

1 You can store the appliance in upright position with the oor
nozzle and stick attached on a at hard oor (Fig. 6).
2 Put the oor nozzle in the position in which the ridges are aligned
with each other.
If you store the appliance this way, do not store it near fragile valuables.
3 Wind the cord round the cord winding hooks on the stick.
 11