Mini HiFi System User Manual

28
English
RECORDING
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to
avoid accidental mixing with other
recording source.
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr0
2
).
– The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for six to
seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB, Incredible Surround or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If “
CHECK TAPE ” is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr0
2
tape
detection hole when covering the tab
opening.
Recording from other sources
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 Press SIDE on remote control to select
the recording side.
™ The
BACK or FRONT flag will be
displayed, depending on the side
selected.
4 Press CD, TUNER or AUX.
• Start playback of the selected source.
5 Press REC to start recording.
™ The
REC flag starts flashing.
6 Press Ç to stop recording.
Notes:
– Only
åå
åå
å or
∂∂
∂∂
∂ mode is available
during recording.
– During recording, it is not possible to
listen to another source.
FRONT
REPEAT
SHUFFLE
PROGRAM
TIMER
STEREO
FM
BACK
HSD
LW
MW
AM
T.A.
NEWS
SOUND NAVIGATION
DOLBY B
NR
DUB
(HSD)
REC
TAPE 2TAPE 1
OPEN OPEN
MINI HIFI SYSTEM
60Hz
500Hz
250Hz
1KHz
2KHz
4KHz
8KHz
VOLUME
REC
INCREDIBLE
SURROUND
DYNAMIC BASS
BOOST
TAPECD
PROG
CLOCK/
TIMER
SIDE A•B
TUNER AUX
PRESET
▲
▲
STOP•CLEAR
SEARCH • TUNING
PLAY
PAUSE PREV NEXT
CD1 • 2 • 3
CDR
TAPE 1 • 2
DIGITAL
SOUND CONTROL
BAND
A. REV
STANDBY
ON
NEWS!
RDS
A. REV
MIC
MIC
LEVEL
NEWS/TA
RDS