GC2800 Series A B C D E F G H I M 3 L K 4 J 5 0 CALC CLEAN 2 6 7 8 9 10 11 12 13 14
Let the iron heat up to maximum temperature and pass the iron over a piece of damp cloth for several minutes to remove any residues from the soleplate. ENGLISH Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. A B C D E F G H I General description (Fig.
To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. 3 Clean the upper part of the iron with a damp cloth. 4 Regularly rinse the water tank with water. Empty the water tank after you have rinsed it (Fig. 9). Double-Active Calc System (specific types only) Note: Refer to chapter ‘General description’ for the specific type numbers.
Problem Cause Solution Water spots appear on the garment during ironing. These wet spots may be caused by steam that has condensed onto the ironing board. Iron wet spots without steam from time to time to dry them. If the underside of the ironing board is wet, wipe it dry with a piece of dry cloth. To prevent steam from condensing onto the ironing board, use an ironing board with wire mesh top. 4239.000.7099.
4239.000.7099.
4239.000.7099.
4239.000.7099.
4239.000.7099.
4239.000.7099.
4239.000.7099.