Register your product and get support at www.philips.
3 12 4 13 4 14 6 16 8 16 8 17 9 19 10 2
EN Fill the water tank with tap water only. Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals to avoid damage to your iron. FR Remplissez le réservoir d’eau avec l’eau du robinet uniquement. N’ajoutez pas de parfum, de vinaigre, d’amidon, de détartrants, de produits d’aide au repassage ou d’autres produits chimiques pour éviter d’endommager votre fer.
ET SYNTHRICS FAB S IL K W O OL C O EN FR AR FS Linen Lin EN FR AR FS Cotton Coton EN FR AR FS Wool Laine EN FR AR FS Silk Soie EN FR AR FS Synthetics Synthétique 6 IC EN FR AR FS TT ON L IN E N MAX LINEN COTTON WOOL SILK SYNTHETIC
EN The Automatic Energy Saving function is active when the steam setting is set to ‘MAX’. When ironing tough wrinkles you naturally apply more pressure onto the iron. Only then more steam is released, hence you save energy. FR Remplissez le réservoir d’eau avec l’eau du robinet uniquement. N’ajoutez pas de parfum, de vinaigre, d’amidon, de détartrants, de produits d’aide au repassage ou d’autres produits chimiques pour éviter d’endommager votre fer.
EN Use the steam boost function to remove stubborn creases at high temperatures ( •• and above) or to iron hanging garments. FR Utilisez la fonction Effet pressing pour éliminer les faux-plis tenaces à haute température (•• et au-dessus) ou repasser des vêtements sur cintre.
TH S Y N R IC S FAB ET IC S IL K WOOL C O TT ON LI NEN , MAX 11
EN Use the spray function to remove stubborn creases at any temperature. FR Utilisez la fonction Spray pour enlever les faux plis difficiles à éliminer. .
EN Auto off (GC3760 only) FR Arrêt automatique (GC3760 uniquement).
EN Descale every two weeks. Fill the water tank and heat the iron to ‘MAX’ temperature. Then, unplug and hold the iron over your sink. Push and hold the slide button to calc-clean while you shake the iron to flush out the water. FR Procédez au détartrage toutes les deux semaines. Remplissez le réservoir d’eau et faites chauffer le fer jusqu’à la température ‘MAX’. Ensuite, débranchez le fer et tenezle au-dessus de l’évier.
EN Cleaning and storage. Do not use steelwool, vinegar or any abrasive cleaning agent. FR Utilisez la fonction Spray pour enlever les faux plis difficiles à éliminer. .
Problem Possible cause Solution EN The iron does not produce steam. The steam position is set to 0. Set the steam position to The iron leaks The water tank is filled beyond its capacity Do not fill the water tank beyond the ‘MAX’ symbol. The steam boost function does not work properly. You have used the steam boost function too often with not enough intervals. Temporarily keep the iron horizontal before you use the steam boost function again.
AR FS 18
Specifications are subject to change without notice. ©2011 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: 4239.000.7881.