Register your product and get support at www.philips.
4 1 2 4 3 For indoor use only 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
22 23 24 25 26 27 28 29
A B 1 2 3 K 4 5 C D 6 J E FGH I 10 9 8 1 2 3 4 5 6 7
HF3470 English 8
8 English IMPORTANT SAFETY INSTRUCTIONS -- This portable light has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter the plug.
10 English -- This appliance meets the requirements of the low voltage directive 2006/95/EC and the EMC directive 2004/108/EC.Int Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. The Philips Wake-up Light helps you wake up more pleasantly. The light intensity of the lamp gradually increases to the set level in the 30 minutes before the set wake-up time.
12 English Using the lamp You can use the appliance as a bedside lamp. 1 To switch on the lamp, press the lamp on/off button (Fig. 11). 2 Press the light intensity + and – buttons to select a light intensity (Fig. 12). You can choose a light intensity between 1 and 20. Note: It takes approx. 1 second for the lamp to go on.This is normal, the lamp needs to heat up. Note:The light intensity you have selected is automatically set as the light intensity level for the alarm as well.
14 English Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol or acetone to clean the appliance. Regularly remove dust from the outside of the appliance with a dry cloth. 1 Always unplug the appliance before you clean it. 2 Clean the outside of the appliance with a dry cloth. Do not let water run into the appliance or spill water onto the appliance (Fig. 2).
16 English English 17 Problem Solution Problem Solution The appliance does not respond when I try to set different functions. Remove the plug from the wall outlet and reinsert it. If you reinsert the plug within approximately 15 minutes, the appliance remembers all settings. If you reinsert the plug after a longer period of time, the appliance will go back to factory settings. You need to set all functions again. The light wakes me too late.