Instruction Manual

Connections

IMPORTANT!

- Before connecting the AC power cord to the

wall outlet, ensure that all other connections have

been made.

- Never make or change any connections with

the power switched on.

- The type plate is located at the rear or bottom

of the system.

FM Indoor Antenna

Connect the supplied FM

antenna to the FM jack. Move

the antenna in various directions

until the clearest signal is

received.

Note:

Connecting antennas

- Keep the antenna as far away as possible from the TV, VCR

or any radiation source to prevent unwanted noise.

AM Indoor Loop Antenna

Connect the supplied AM loop antenna to the AM

jack. Position the loop antenna to receive the dearest

sound.

FM Outdoor Antenna

For better FM reception, use a 75 ohm coaxial cable (not

supplied) to connect the system to an outdoor FM antenna

as shown.

Connections