User Manual

4
EN
When the humidier is
not used for a long time,
bacteria and mold may
grow on the lters. Check
the lters before you start
using the humidier again.
If the lter is very dirty with
dark spots, replace it (see
chapter ‘Replacing the
humidication lter’).
Do not wash the lter in a
washing machine or dish
washer, otherwise the lter
will be deformed.
The humidier is only
intended for household
use under normal
operating conditions.
Clean the water tank and
humidication lter every
week to keep it clean.
Only ll the water tank with
cold tap water. Do not use
ground water or hot water.
Do not put any substance
other than water in the
water tank. Do not add
fragrance or chemical
substance into the water.
Use only water (tap,
puried, mineral, any sort
of potable water).
If you do not use the
humidier for a long time,
clean the water tank and
dry the humidication lter.
If you need to move the
humidier, disconnect the
humidier from the power
supply rst. Then empty
the water tank, and carry
the humidier horizontally.
Keep the humidity sensor
dry. If the sensor gets
wet, it could miscalculate
the humidity level, and
the humidier could
stop working due to
miscalculated humidity
level.
Unplug the appliance
during lling and cleaning.