Operation Manual

5 Now use the screwdriver as a lever to pry the
2 handle sections apart.
6 Pull the 2 handle sections completely apart.
7 Insert the screwdriver underneath the
electronic circuit board in multiple places.
8 Twist and pry the electronic circuit board
loose until it is completely separated from the
handle.
9 Pry the batteries loose by inserting the
screwdriver on the sides of the two batteries
in the locations that are shown in the gure.
10 Twist the screwdriver to break the glue bond
round the batteries. The batteries are joined
together with glue and are lifted out together.
 15