Owner manual

2005-12-12 Page 21
7 TECHNICAL SPECIFICATION
Power requirements +8..40V, 8 Watt (max)
Typically 12..15 Volt
Optics C-mount
Mechanical
Dimensions: 137 x 75 x 50 mm (l x w x h)
Sensor
Size 2/3”
Number of pixels 1280 x 1024
ADC resolution 10 bits
Regions of interest 1
Exposure time programmable
Inca 320
Frame rate 27 fields per second
Electronic shutter Rolling and synchronous
Gain programmable 0..10.69 dB
Sub-sampling factor 2
FPN: < 0.5% pp
Inputs
Maximum Ion: 10 mA
Digital input: 6 bits isolated
Trigger input: 1 bit isolated
TTL level compatible
Outputs
Maximum Vce: 40 volt, maximum Ic: 10 mA
Digital output: 6 bits isolated
Flash output: 1 bit isolated
TTL level compatible
delay and duration
programmable
Watchdog output: 1 bit isolated
TTL level compatible
Reset not isolated