iPlayer 3 ER3 iPLAY x IPS PHIL S SET PRE 5 4 3 R POWE 2 1 1 DMX IAL SER IAL SER 1 Quick Start Guide iPlayer 3 Documentation Overview Software Installation Hardware Installation Understanding Light Addresses Light Show Playback Configuration Menus Firmware Update 2 DMX 2 USB
iPlayer 3 Documentation Overview This Quick Start guide describes the essential steps required to set up the iPlayer ® 3 controller and play a pre-configured light show on your lighting installation. The following documents are also available to help you fully realize the potential of your iPlayer 3 and lighting installation as a complete system: Document Name Online Location Included with iPlayer 3 packaging iPlayer 3 Installation Instructions www.colorkinetics.
Hardware Installation The iPlayer 3 comes packaged with the printed iPlayer 3 Installation Instructions. The Installation Instructions document has illustrated steps covering physical setup, hardware mounting, and connecting your lighting system. Follow the steps in the iPlayer 3 Installation Instructions now. Understanding Light Addresses E Tip To follow this Quick Start guide, do not change the default light addresses assigned to your fixtures.
Configuration Menus You can change the following iPlayer 3 options via Configuration mode: • Triggers – Triggers enable you to assign shows to the Preset buttons on the iPlayer 3, the Preset buttons on the Controller Keypad or the contact switches connected to an AuxBox. Triggers also specify playback behaviors such as repeat or jump to another show. • Alarms – Alarms enable you to automate show playback by specific time, date, day of the week or astronomical event.