Manualshelf

NETWORK CARD User Manual

ManualsBrandsPhilips ManualsNetwork CardKX-PNBC8
121122123124125126127128129130
129
8.2 Status Page
The Status/Configuration report is sent as a print job to the printer when the print
server is powered on. For example, the report on the next page shows the
configuration of the print server immediately before the report is printed. The status
page is set to “Disable” by default, but it is alterable to Enable/Disable by MAP utility.
It is strongly recommended that you review this report immediately after installation
and any time the setup has been changed. If the report does not include a protocol
that was configured, check that the procedure was done properly.