NETWORK CARD User Manual

67
■ If the printer driver is not installed
Install the printer driver and set up the printer port.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
After copying files, the Add Printer Wizard window is displayed.
9. Select Network printer sever, then click Next>.
The Connect to Printer window is displayed.
Note: If your server computer is Windows 95/Windows 98, select My Computer and
continue the installation. Select LPT1 from the Available ports: box in the Add
Printer Wizard. After completing the installation, set up the printer port on the
printer’s property window. (For instructions on how to set up the printer port, refer
to If the printer driver is already installed on page 65)