Stereo Receiver User Manual

ManualsBrandsPhilips ManualsStereo ReceiverLTC 2600

LTC 2600 Series

Video Multiplexers

Instructions For Use

Summary of content (46 pages)

PAGE 1
Instructions For Use LTC 2600 Series Video Multiplexers
PAGE 2
PAGE 3
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. 16. Servicing - Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 17. Damage Requiring Service - Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: 2.
PAGE 4
SAFETY PRECAUTIONS SECURITE C A U T IO N A T T E N T IO N R IS K O F E L E C T R IC S H O C K . D O N O T O P E N ! R IS Q U E D E C H O C E L E C T R IQ U E . N E P A S O U V R IR . Danger: Pour ‚éviter tout risque d'électrocution, ne pas ouvrir le boîtier. Il n'y a pas de pièces remplaçables à l'intérieur. Pour toute révision, s'adresser à un technicien spécialisé. Caution: To reduce the risk of electrical shock, do not open covers. No user serviceable parts inside.
PAGE 5
SICHERHEITSVORKEHRUNGEN PRECAUCIONES DE SEGURIDAD V O R S IC H T P R E C A U C IO N R IE S G O D E C H O Q U E E L E C T R IC O . ¡N O A B R IR ! R IS IK O E IN E S E L E K T R IS C H E N S C H L A G E S N IC H T Ö F F N E N ! Precaucion: Para Reducir El Riesgo De Choque Eléctrico, Favor No Abrir La Cubierta. Este Equipo No Consta De Piezas O Partes Que Requieren Servicio O Mantenimiento. Para Reparaciones Favor Referirse A Un Técnico Calificado.
PAGE 6
LTC 2600 Series Contents Section IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Section 1: introduction to the ltc 2600 series video multiplexer . . . . . . . . . .7 1.1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 1.
PAGE 7
LTC 2600 Series Section 1 Introduction SECTION 1: INTRODUCTION TO THE LTC 2600 SERIES VIDEO MULTIPLEXER 1.1 Unpacking Unpack carefully.This is electronic equipment and should be handled carefully. Check for the following items: • LTC 2600 Series Video Multiplexer • Instuctions for use • Quick Reference Guide • One shielded cable with a 25-pin D-Type connector on one end. Used for Alarm/Accessory connections. • Rack mount kit is included. • One shielded cable with 15-pin D-type connector on one end.
PAGE 8
LTC 2600 Series Section 1 Introduction Power Model No. Mode Rated Voltage Voltage Range Power 6 Channel Standard Color Models LTC 2622/50 Duplex 220 VAC, 50/60 Hz LTC 2622/60 Duplex 120 VAC, 50/60 Hz 195.5 to 253 108 to 132 30 W 30 W 9 Channel Standard Monochrome LTC 2631/50 Simplex LTC 2631/60 Simplex LTC 2632/50 Duplex LTC 2632/60 Duplex Models 230 VAC, 50/60 120 VAC, 50/60 230 VAC, 50/60 120 VAC, 50/60 Hz Hz Hz Hz 195.5 to 253 108 to 132 195.
PAGE 9
LTC 2600 Series Section 2 Installation SECTION 2: INSTALLING THE VIDEO MULTIPLEXER 2.1 Mounting The multiplexer is supplied as a desktop unit. If desired the unit may be rack mounted using the included rack mount kit. 2.2 Connecting the Video Multiplexer System 1. Refer to Figures 2A and 2B for details on the input/output connections supplied by the multiplexer. (Be sure to reference the appropriate drawing for your multiplexer model.) 2.
PAGE 10
LTC 2600 Series Section 2 Installation ** When using Remote Keyboard LTC 2601/00 or LTC 2602/00, to control Philips VCRs, please use the following connections. From Console Port of System4 to RS-232 Port of Philips VCRs Function 9 Pin D sub Rx 2 Gnd 5 Tx 3 or purchase a S1383 cable.
PAGE 11
LTC 2600 Series Section 2 Installation 2.3 Programming 1. When all connections have been successfully completed, apply power to the system. 2. Upon power up, the multiplexer will be using the factory-set default parameters. (See Appendix C for a complete listing of the Factory Default Settings.) 3. Refer to Figures 2D, 2E and 2F for a detailed review of the multiplexer front panel controls which will be used in programming.
PAGE 12
LTC 2600 Series Section 2 Installation Indicators LED POWER ALT RECORD PLAYBACK VCR Test MON B SEQ CAMEO CAMERA KEYPAD ZOOM ACT ALM Indication Power supplied to unit Primary indication: Alternate functions (Flashing): Camerato cameo mode (ALT + SELECT) Record mode enabled Playback mode enabled VCR Test enabled Monitor B enabled (Front panel keys control monitor B display) Sequence mode enabled Cameo mode enabled (Camera keys control cameo images Camera mode enabled (Camera keys control camera images) Num
PAGE 13
LTC 2600 Series Section 2 Installation 4. The multiplexer is programmed through on-screen menus which include access to on-screen HELP information. The menus will be displayed on Monitor A in the system. 5. To access the menu screens, press the ALT key followed by the MENU key . 6. The Main Menu (as shown below) displays two setup options: Quick Setup and Advanced Setup.
PAGE 14
LTC 2600 Series Section 2 Installation 8. Select Time/Date from the Quick Setup menu. Enter the time format (12 or 24 hours), time, date format (dd/mm/yyyy; mm/dd/yyyy; yyyy/mm/dd) and date information as requested. Use the direction (arrow) keys to move the cursor and to scroll through parameter settings. Use the SELECT key to choose the parameter you want to program and to save your selections.
PAGE 15
LTC 2600 Series Section 2 Installation 12. Return to the Quick Setup main menu by pressing the zoom key. Continue by selecting VCR Setup (menu shown below). VCR SETUP SETUP 1 >RECORD SETUP *VCR OUT* PLAYBACK FORMAT LTC2600 RECORD LOCK OFF VCR SETUP SETUP 1 >RECORD SETUP *VCR OUT* RECORD SETUP *MON B* PLAYBACK FORMAT LTC2600 RECORD FORMAT LTC2600 RECORD LOCK OFF Choose:SELECT Choose:SELECT More:V Exit:ZOOM Standard Model Display.
PAGE 16
LTC 2600 Series Section 2 Installation 16. From the VCR Setup menu, select RECORD SETUP, then SELECT VCR. Scroll through the different selections listed with the TYPE parameter until you find your VCR model. SELECT VCR *VCR OUT* SETUP 1 >TYPE:PHILIPS TC3991 HD EDIT CUSTOM VCR Choose:SELECT More:V Edit: >< Exit:ZOOM 17. After you select a VCR model, use the SELECT key to move to the TIMELAPSE Mode menu.
PAGE 17
LTC 2600 Series Section 3 Operation SECTION 3: OPERATING THE LTC 2600 SERIES VIDEO MULTIPLEXER 3.1 Guide to Multiplexer Operation Operating the LTC 2600 Series Video Multiplexer requires a general knowledge of basic and combined operating modes as described in this section. Basic operating modes are: LIVE (Display), RECORD, and PLAYBACK. Duplex multiplexer models provide combinations of the basic modes (e.g. simultaneous recording plus playback).
PAGE 18
LTC 2600 Series Section 3 Operation Zoom : Enables the active camera display (a cameo in multi or quad display) to be digitally enlarged by a factor of 2:1. "Zoom" will be displayed on the monitor screen. Selecting any other camera (using the camera keys) will display that camera image in full screen enlarged mode. Use the arrow keys to pan/tilt the enlarged picture to allow closer inspection of any part of the selected image. Freeze : Holds the selected camera picture on either full screen or cameo.
PAGE 19
LTC 2600 Series Section 3 Operation 3.5 Combined Modes The Duplex multiplexer models also provide combinations of the basic modes of operation as described in this section. Record Plus Multiscreen Display: (See Appendix B, Figure B1) Allows live pictures to be displayed on Monitor A in either FULL, QUAD or MULTI screen mode, FULL screen or sequencing of all cameras can be displayed on Monitor B while recording selected cameras onto the VCR.
PAGE 20
LTC 2600 Series Section 4 Advanced Programming SECTION 4: ADVANCED PROGRAMMING & OPERATION 4.1 Guide to Advanced Functions The following information is provided for advanced multiplexer system and customized system configurations. This information is not necessary for typical, day-to-day operations of the multiplexer (see Sections 2 and 3). Information is also provided in this section for changing factory-set default parameters (e.g. camera titles, display configuration, etc.
PAGE 21
LTC 2600 Series Section 4 Advanced Programming 4.3 Action Setup < The LTC 2600 Series multiplexer includes a Digital Motion Detection feature that detects movement within the camera scene. When this feature is programmed and motion is detected, the record/display rates will increase. Using the ACTION LIST facility, the priority of recording can be changed to include recording of camera pictures and at the same time prioritize picture display on the monitor.
PAGE 22
LTC 2600 Series • • • • • Section 1 Introduction Manual Reset (System4 models only): Enable: Press ACT key, and all action(s) will be reset. Disable: All actions will follow the action dwell time as programmed. Camera History (System4 models only): By switching on CAMERA HISTORY, the front panel keys will flash for cameras that were in Action once the ACT key is pressed. The Action can now be cleared by pressing individual camera keys or all can be cleared at once by pressing the ACT key again.
PAGE 23
LTC 2600 Series Section 4 Advanced Programming 4.4 Alarm Setup Depending on your multiplexer model, up to 9 or 16 alarm inputs can be connected to the multiplexer and are associated with their corresponding video input. Alarm inputs can be configured as normally open or normally closed. These inputs correspond to the camera inputs so that when an alarm input is initiated, the respective camera picture is displayed or recorded. (Figures in Section 2 illustrate the Alarm In/Out connections.
PAGE 24
LTC 2600 Series Section 4 Advanced Programming 4.7 Configure Setups The LTC 2600 Series multiplexer has the capability to provide up to six individually configured setups that are retained in the multiplexer memory. By using these setups, the multiplexer can be programmed to automatically change its mode of operation based on a timer setting. This allows different configurations to be used (e.g. day, night, weekend and holidays).
PAGE 25
LTC 2600 Series • • • Section 4 Advanced Programming Cameo borders: The cameo border format can be selected, enabling easy definition of the picture. The border can be set to: white, gray or black. Screen position: Use the position command to select top, middle, or bottom of display for the location of the time/date/camera title information. Gain Control: To maintain constant video quality, each camera input has individual automatic gain circuits that are suitable for most applications.
PAGE 26
LTC 2600 Series Section 5 Enhanced Model Functions SECTION 5: SYSTEM4 MODEL FUNCTIONS 5.1 Guide to System4 Model Functions The following information pertains to System4 multiplexer models only. These advanced programming and operating functions, which are accessed through the Advanced Setup menu, include: CAMERA SEQUENCES, PC PRINTER SETUP, LOG, PASSWORD, and EXPAND SYSTEM. System4 multiplexer models also support System Keyboards.
PAGE 27
LTC 2600 Series Section 5 Enhanced Model Functions 5.4 LOG The Log option allows the operator to view a history of action, recording, and alarm activity. Up to 300 events are retained in the log. The AUTOPRINT command will automatically print log events, therefore providing a larger event history. When the log is full, the oldest events are overwritten. The LOG option includes: • View log: view the list of logged events.
PAGE 28
LTC 2600 Series Section 5 Enhanced Model Functions STATUS DISPLAY CAMEO ZOOM FULL QUAD FOCUS MULTI ACTION CLEAR MENU IRIS ALARM CLEAR FREEZE ALT SELECT LTC 2601/00 Keyboard Note: Italic Font for VCR Functions STATUS DISPLAY CAMEO FULL FOCUS MULTI ACTION CLEAR IRIS ALARM/ CLEAR FREEZE ALT SELECT LTC 2602/00 Keyboard 5.8 Keyboard Operation Numeric Display The numeric display is a three-digit display that shows the number of the multiplexer that the keyboard is currently controlling.
PAGE 29
LTC 2600 Series Section 5 Enhanced Model Functions LED Display Certain keys have an LED indicator to light up or flash to indicate that the function is either enabled or in the alarm state. The keys that are tied to an LED are: Cameras 1 -- 16, ALT , ACT , ALM . The operation of these LEDs is identical to those on the front panel of the multiplexer Numeric Keypad The numeric keypad is designed to serve three purposes: selecting cameras, selecting cameos, and numeric entry.
PAGE 30
LTC 2600 Series Appendix A APPENDIX A FEATURES Camera Inputs LTC 2622 LTC 2631 LTC 2632 LTC 2641 LTC 2642 LTC 2672 LTC 2651 LTC 2652 LTC 2661 LTC 2662 LTC 2681 LTC 2682 6 9 9 9 9 9 16 16 16 16 16 16 Duplex Operation Yes ** Yes ** Yes Yes ** Yes ** Yes ** Yes Simplex Operation ** Yes ** Yes ** ** Yes ** Yes ** Yes ** Color B/W B/W Color Color Color B/W B/W Color Color Color Color Multiscreen Display Mode Digital Monitor Outputs 1 1 1 1 1 2 1 1 1
PAGE 31
LTC 2600 Series Appendix B: Special Applications APPENDIX B: SPECIAL APPLICATIONS Video PIR Sensor Video Video Spot Monitor Main Monitor Philips Philips Up to 16 cameras VCR VCR IN OUT MON B MON A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VEXT In ALARM Out In Head Switching Pulse VCR Head Switching Pulse Gnd LTC 2600 Series PIN 21 VEXT Input Pin 25 Figure B1: Record Plus Multiscreen Display Video Video Video Spot Monitor P h ilip s Main Monitor P h ilip s Up to 16 camer
PAGE 32
LTC 2600 Series Appendix B: Special Applications AutoDome Video Video Au toDom e BUR LE V id eo Video PI R S ensor V id eo B UR LE R ecord/P la yba ck VCR Philip s Out Data In Up to 16 cameras KE YB D S VHS IN CONS OLE S VHS OUT A L L PL E X --- VCR IN MON B VCR OUT S DA MON A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ALAR M The LTC 2672 and LTC 2682 models provide two independent VCR outputs. Each output can be programmed to record camera sequences.
PAGE 33
LTC 2600 Series Appendix B: Special Applications V id eo AutoDome V id eo Au toDom e BUR LE PI R Sensor BUR Data LE V id eo P hilip s P hilip s Up to 16 cameras KE YBD CONS OLE S VHS IN S VHS OUT VCR IN MON B VCR OUT S DA MON A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ALAR M Termina ted res is ter In Out AL L PL EX - - - PHIL IP S Figure B5: LTC 2672, LTC 2681, and LTC 2682 Series with LTC 2650 GUI Video AutoDome Video AutoDome Video E BURL Video Video Philip
PAGE 34
LTC 2600 Series Appendix B: Special Applications BU RL E V ideo V ideo V ideo P I R S ensor Up to 16 cameras Philip s Philip s VCR IN VCR M ON B M ON A 1 2 3 4 5 6 7 8 9 10 11 12 OUT ALAR M 13 14 15 16 S ite A 3032724-702 Connected to " V CR Out" of M ultip lexer Multiplexer in the R ecord (E ncode) mode M ultiplexer is in the DE CODE (playback) mode of operation.
PAGE 35
LTC 2600 Series Appendix C: Factory Default Settings APPENDIX C: FACTORY DEFAULT SETTINGS ITEM DATE/TIME: Date Time Time Format Date Format VCR SETUP: Time Lapse Record List Playback Format Record Format Record Lock VEXT CREATE VCR SETUP: VCR Title VCR/Field Table DEFAULT OPTIONS 01/01/1998 12/00/00 24 H dd/mm/yy (PAL) mm/dd/yy (NTSC) 12 hr, 24 hr. mm/dd/yy dd/mm/yy yy/mm/dd 3 Hr (PAL) PAL: 3 to 720 hrs. or as programmed. 2 Hr (NTSC) NTSC: 2 to 720 hrs. or as programmed. 01-16, 01-16.
PAGE 36
LTC 2600 Series Appendix C: Factory Default Settings ITEM DEFAULT CAMERA TITLE: Camera Title CAMERA 1 SEQUENCES: Seq dwell full A Seq dwell quad A Seq dwell full B Seq dwell quad B Mon A full Mon A quad OPTIONS 5 sec 5 sec 5 sec 5 sec 1-16, 1-16 1,2,3,4 5,6,7,8 9,10,11,12 13,14,15,16 1,2,3,4 5,6,7,8 9,10,11,12 13,14,15,16 1 - 60 sec. 1 - 60 sec. 1 - 60 sec. 1 - 60 sec. Any camera in a 32 camera sequence. i.e. 1,5,8,4,2,3,4 Any camera to cameo assignment is allowed.
PAGE 37
LTC 2600 Series Appendix C: Factory Default Settings ITEM DEFAULT OPTIONS CONFIGURE DISPLAY: Time/Date mon A Time/Date mon B Show Text mon A Show Text mon B Text ON ON ON ON White:Black Cameo borders Menu Timeout Gain Control BLACK ON AUTO ON,OFF ON,OFF ON, OFF ON, OFF Clear:White, Clear:Grey, Clear:Black White:Clear,White:Grey,White:Black Grey:Clear, Grey:White, Grey:Black Black:Clear, Black:White, Black:Grey White, Grey Black ON,OFF Manual VIDEOLOSS: Vid Loss o/p Vid Loss Relay Video Loss List
PAGE 38
LTC 2600 Series Appendix D: Programming Reference APPENDIX D: PROGRAMMING REFERENCE Menu Trees: Advanced Setup The following menu trees are provided for reference in locating advanced programming functions. Descriptions of all these functions are located in Section 4. (The Quick Setup menus are described and shown in complete detail in Section APPENDIX C: PROGRAMMING REFERENCE Menu Trees: Advanced Setup The following menu trees are provided for reference in locating advanced programming functions.
PAGE 39
LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup (continued) MAIN MENU SETUP 1 QUICK SETUP >ADVANCED SETUP Choose: SELECT 1.0.0 More Exit: ZOOM * * * * ADVANCED SETUP SETUP 1 TIME/DATE AUTOSET VCR SETUP ACTION SETUP ALARM SETUP CAMERA TITLES SEQUENCES CONFIGURE SETUPS CONFIGURE DISPLAY PC/PRINTER VIDEOLOSS LOG PASSWORD EXPAND SYSTEM DEFAULT SETTINGS LANGUAGE ENGLISH Choose: SELECT CAMERA TITLES SETUP 1 Each camera can be given a 16 character title. (1) CAMERA.1 .........
PAGE 40
LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup (continued) MAIN MENU SETUP 1 QUICK SETUP >ADVANCED SETUP Choose: SELECT 1.0.
PAGE 41
LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup - VCR SETUP * * VCR SETUP SETUP 1 RECORD SETUP *VCR OUT* RECORD SETUP *MON B* PLAYBACK FORMAT LTC2600 RECORD FORMAT LTC2600 RECORD LOCK OFF Choose: SELECT More Exit: ZOOM RECORD SETUP *VCR OUT* SETUP 1 VEXT INPUT SELECT VCR TIMELAPSE RECORD LIST VCR OUT Choose: SELECT OFF 2 hr - SP More Exit: ZOOM SELECT VCR *VCR OUT* SETUP 1 TYPE PHILIPS TC3990A EDIT CUSTOM VCR Choose: SELECT More Exit: ZOOM RECORD LIST *VCR OUT* SETUP
PAGE 42
LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup - ACTION SETUP * * * * ACTION SETUP SETUP 1 ACTION DWELL ACTION LIST ACTION ZONES WALKTHROUGH MANUAL RESET CAMERA HISTORY BEEPER Choose: SELECT Edit: 05 sec ACTION LIST SETUP 1 -- -- -- -- -- -- -- --- -- -- -- -- -- -- -Use camera keys to select camera for list.
PAGE 43
LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup - ALARM SETUP * * ALARM SETUP SETUP 1 ALARM DWELL ALARM LIST ALARM INPUTS MANUAL RESET CAMERA HISTORY BEEPER Choose: SELECT Edit: 05 sec ALARM LIST SETUP 1 -- -- -- -- -- -- -- --- -- -- -- -- -- -- -Use camera keys to select camera for list.
PAGE 44
LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup - CONFIGURE SETUPS CONFIGURE SETUPS LOAD SETUP COPY SETUP SETUP TITLE TIME EVENTS Choose: SELECT More Exit: ZOOM LOAD SETUP SETUP 1 SETUP 2 SETUP 3 SETUP 4 SETUP 5 SETUP 6 Choose: SELECT More Exit: ZOOM COPY FROM Copy a memory setup (1-6) to a different memory setup location. COPY FROM: (1) to (2) Move Cursor: Default: FREEZE Save: SELECT Edit: SETUP TITLE Each setup can be given a 12 character title. (1) SETUP.1. . . . .
PAGE 45
LTC 2600 Series Appendix E: Quick Function Keys APPENDIX E: QUICK FUNCTION KEYS The LTC 2600 Series Video Multiplexer provides quick function keys which enable “instant access” to the programming lists critical for multiplexer operation.To access the list commands, you will have to press a sequence of keys.
PAGE 46
3935 890 07114 99-05 Printed In U.S.A. © 1999 Philips Electronics N.V. © 1999 Philips Communication & Security Systems Inc. All Rights Reserved. Philips ® is a registered trademark of Philips Electronics N.V.